Saeco IPERAUTOMATICA PREMIUM D.A. 3P2016, Operation And Maintenance Manual, Page: 38 / 68

English
38
8
DISPLAY Description
2.4.14. When the vending machine is in Master mode, this menu enables setting of the address of
any slave connected vending machine.
If the vending machine is in Slave mode, it enables setting of its address.
Possible addresses are 0x40, 0x48 and 0x50.
Default = 0x40.
MDB Slave Address
0x40
2.4.15. Allows you to disable the bill reader if there is no change.
no change =no bills
…
2.5.
It allows the user to set the maximum credit which can be accepted by the vending machine.
Once this limit has been reached, the payment systems are disabled so that no more credit
can be accepted.
Default = 20.00.
Max credit
20.00
2.6.
Enables the user to use any residual credit to purchase other beverages.
By setting "N" (no), the residual credit will be collected by the vending machine.
Multivend
no
2.7. It establishes the maximum time (expressed in seconds) beyond which the vending machine
collects the displayed residual credit.
The time is adjustable at intervals of 10 seconds.
Setting "000" the function is disabled.
Overpay Time
180
2.8. Enables setting of the number of fixed zeros of the credit.
Fixed Zeroes
0
2.9. Enables setting of the position of the decimal point of the credit.
Decimal Digits
2
2.10. Enabling this option, an internal control is activated, which resets the communication with the
payment systems if the communication is blocked.
Credit Wdog
2
2.11. Management of pre-selection options
Preselection
2.11.1. Pre-selection time duration (in seconds)
Pre-selection Time
8
2.11.2. It enables the current pre-selection deletion by pressing any button other than sugar buttons
and by pressing the change return button of the change giver.
clear pre-selection
yes
2.12. It enables the management of the cash sale notification command (for card reader MDB)
Cash sale cmd sending
yes
2.13. "safe" mode of protocol EXE/PHD.
It does not accept selling controls outside the pre-selection time of the machine.
(EXE/PHD) safe mode
yes
3.
PRODUCT SETUP
…
3.1.-6
It allows selecting the instant product for which you wish to enable powder dispensing
before water dispensing. This brewing cycle will be carried out only when the quantity of
powder to be brewed does not exceed 34.
Product Before
…
3.2. It allows to enable or disable the beverage keys.
By pressing a disabled key during operation, the message "NOT AVAILABLE" will be
displayed.
Beverage Enabling
yes