English
36
8
DISPLAY
Description
2.1.
It allows you to choose the protocol used by the vending machine to dialogue with the
payment system installed on it:
EXECUTIVE Protocol;
PRICE HOLDING/DISP Protocol;
BDV Protocol;
MBD Protocol;
NO PROTOCOL (no serial protocol);
Master/Slave executive (the Vending machine operates as Master for another vending
machine);
PHD Master/Slave (the Vending machine operates as Master for another vending machine
that works with the PRICE HOLDING/DISP protocol);
MDB SLAVE (the Vending machine acts as Slave to another vending machine);
PHD REMOTE (select if you want to use the app Breasy to select products);
The "NO PROTOCOL" setting will be used when a payment system operating with one of
the protocols provided by the other settings "EXECUTIVE", "PRICE HOLDING", "BDV",
"MDB" "MDB SLAVE" or "EXEC MASTER/SLAVE" is not installed on the VM.
This setting is necessary to allow the VM to continuously checks for dialogue with the
provided payment system.
If the VM detects no dialogue, it signals this fault on the display and shows the message "NO
LINK".
Protocol
2.2.
Allows enabling of the parameters of the parallel coiner, the mechanical coiner, the cancelling
machine and the choice of values to be assigned to the single money channels.
Entry description:
Parallel Coiner
…
2.2.1.
By setting "Y", the parallel coiner, the mechanical coiner and the cancelling machine control
are enabled.
If set on "N", the parallel coiner (if any) connected to the vending machine will be excluded.
Enable
no
2.2.2.-9
It allows you to set the value of the coins forwarded to the vending machine by the parallel coiner, the mechanical
coiner and the punching machine.
The following "PAIRING TABLE" indicates how channels and related payment systems are connected to each other.
Coin Values
…
2.3.
It enables the parameters of the parallel banknote validator and the choice of values to be
assigned to single banknote channels.
Entry description:
Banknote Validator
…
2.3.1.
By setting "Y", the management of the parallel reader is enabled.
By setting "N", a parallel reader which may be connected to the vending machine is always
disabled.
Enable
no
2.3.2.
Enables setting of the active level of the banknote reader inhibition signal.
Inhibition Level
0
2.3.3.-7
Enables setting of the value of banknotes transferred to the vending machine from the
parallel reader.
Banknote Value
…
2.4.
Enables access to particular functions of the MDB protocol.
MDB settings
…
2.4.1.
It allows disabling or enabling the possibility of performing any Saeco Card recharge operation
By setting RECHARGE = NO the vending machine will only deduct the cost from MDB
cards.
Recharge Enabled
no
2.4.2.
Enables setting of the maximum credit level, beyond which all recharge operations (if
enabled) are ineffective.
By setting MAX RECHARGE = 20.00, the credit on the vending machine will be transferred
to the card if the sum does not exceed 20.00.
Max Card Recharge
10.00