Saeco Intelia Deluxe HD8904, Quick Start Manual

Page: 13 / 60

10 Remove the automatic milk frother from the steam wand. Remove the rubber grip from the
steam wand.
The steam wand can be hot after use.
11 Remove the suction tube (Fig. 34).
12 Remove the automatic milk frother by pressing on the sides (Fig. 35).
13 Remove the rubber lid. (Fig. 36)
14 Rinse the components with lukewarm water.
Note: You can also clean these components in the dishwasher.
15 Press in the middle to attach the lid and make sure it is in place. (Fig. 37)
16 Attach the automatic milk frother to the fitting and make sure it is locked into place (Fig. 38).
17 Attach the suction tube (Fig. 39).
18 Insert the rubber grip back on the steam wand. Insert the automatic milk frother on the
rubber grip until it locks into place.
Guarantee and support
If you need information or support, please visit www.saeco.com/support or read the separate
worldwide guarantee leaflet.
To buy spare parts, visit www.shop.philips.com/service or go to your Saeco dealer. You can also
contact the Philips Consumer Care Centre in your country.
Ordering maintenance products
- AquaClean water filter (CA6903)
- Milk circuit cleaner (CA6705)
- Coffee oil remover (CA6704)
- Descaling solution (CA6700)
- Lubricating grease (HD5061)
Recycling
- This symbol on a product means that the product is covered by European Directive
2012/19/EU. Inform yourself about the local separate collection system for electrical and
electronic products. Follow local rules and never dispose of the product with normal household
waste. Correct disposal of old products helps prevent negative consequences for the
environment and human health (Fig. 40).
ENGLISH
13