Saeco Intelia Deluxe HD8904, Quick Start Manual

Page: 10 / 60

Frothing milk
Danger of scalding. Dispensing may be preceded by small jets of hot water. Only use the
appropriate protective handle.
1 Insert the suction tube into the automatic milk frother (Fig. 15)
2 Insert the automatic milk frother on the rubber grip until it locks into place. (Fig. 16)
3 Insert the suction tube into the milk container (Fig. 17).
4 Place a cup under the automatic milk frother and press the MILK FROTH button (Fig. 18).
,
The machine dispenses the frothed milk directly into the glass
5 Press the OK button to stop frothing.
Hot water
Danger of scalding. Dispensing may be preceded by small jets of hot water. Only use the
appropriate protective handle.
1 Remove the automatic milk frother from the steam wand (Fig. 19).
2 Place a container under the steam wand (Fig. 20).
3 Press the HOT WATER button. Hot water dispensing starts automatically.
4 Press the OK button to stop hot water dispensing. Remove the container.
Descaling
You have to descale the machine when the display shows the CALC CLEAN icon or after
8 AquaClean filter replacements.
Note: If you do not descale when the machine shows the CALC CLEAN icon or after 8 AquaClean filter
replacements, the machine may stop working properly. In this case, repairs are not covered by the
guarantee. (Fig. 21)
Never drink the water with descaling mixture that you pour into the water tank or any water
with residues that comes out of the machine during the descaling procedure.
The descaling procedure lasts approximately 30 minutes. Only use the Saeco descaling solution to
descale the machine. The Saeco descaling solution is designed to ensure optimal performance of the
machine. You can buy the Saeco descaling solution in the online shop at www.shop.philips.com/
service.
Descaling procedure
Note: You can pause the descaling or rinsing cycle by pressing the ESC button. The display will show the
following icon. To continue the descaling or rinsing cycle, press the OK button. (Fig. 22)
1 Remove and empty the drip tray. Slide the drip tray back into the machine.
Note: Remove the AquaClean water filter from the water tank (if present).
2 Remove the automatic milk frother from the steam wand.
3 Press the OK button.
ENGLISH
10