22
23
10 mm
key
7 mm
key
Phase 13
If the gearwheel ring is damaged, disassemble
the toothed wheel using a 10 mm key and a 7
mm key to unscrew the locknut.
Otherwise, proceed from Phase 23.
Phase 14
Insert the new gearwheel ring and couple with
the gear of the pin and proceed with fixture by
inserting with washer and locknut.
Phase 15
Lock the nut on the shaft of the brass pin using
7 and 10 mm keys.
Phase 16
Proceed with application of grease on the entire
ring.
WARNING!
use exclusively grease type
“Interflon fin food grease 2”
code no. 14-INTGR22002 packs of 150 ml
code no. 14-INTGR22004 packs of 400 ml
EN Incanto DOT.indd
18/05/2005, 12.05
23
