Saeco GROUP 700, Installation And Operation Manual

Page: 8 / 56

Inglese
8
3.4 Basic operation concepts
During the normal functioning the distributor is in
standby status. Introducing the necessary amount,
according to the pre-set price and after pressing
the key relative to the desired drink, the drink
dispensing cycle is activated: It can be divided in
different processes:
CUP DISPENSER
_
It is the first operation that the distributor
activates (except for the “without CUP”
dispensing).
_
The nozzle support movement motor is
engaged to move the support back to allow
the cup to fall (fig.5).
SUGAR AND SPOON DISPENSER
Where set and requested, an amount of sugar
that is pre-set to the maximum dose is dispensed
with the possibility to stop in correspondence to
the desired dose.
The dispensing procedure occurs according to
the following phases:
_
The geared motor activates the helicoidal
screw conveyor of the sugar container,
dispensing the desired quantity into the product
chute (fig.7).
fig. 5
fig. 6
fig. 7
fig. 8
_
The motor inside the cup dispenser moves the
scrolls to separate and make the cup fall into
the special support fork inside the receptacle
(fig.6).
_
The chute drive motor is engaged and allows
sugar to be unloaded into the cup (fig.8).