Saeco GROUP 700, Installation And Operation Manual

Page: 30 / 56

Inglese
30
Structure of job menus
To access the programming it is necessary to
know the access code or password
cod. 00000
The code to be entered is composed of five digits.
The cursor appears under the first digit; by the
keys
“+” and “-“ (1 st and 2 nd of the keyboard)
increase or decrease the number; by the 3
rd
key
( “ number ” ) move the cursor.
Repeat the operations until the access code is
composed.
Once the code is composed, press the key “ Enter ”
(4 th ) so as to access the programming.
F
Attention
The default code is 00000
After entering the code, the display visualises the
first function:
- Pressing ENTER you access the first function;
- Pressing
+
the next function will be displayed;
- Pressing PRG you exit from the job sub menu
(see example a).
N.B . : If you are in selection mode you can pass to
the programming mode.
If you are in SERVICE mode, first, go to
SELECTION, pressing key
2 (fig.63) then go to
PROGRAMMING, pressing key 1 (fig. 63).
The main menu is composed as follows:
TIMES-DOSES OPTIONS
PRICES COINS
DISCOUNTS VENDS
PRICE-SELECT. TEMPERATURE
INCLUDE-SELECT.
To exit from the programming mode press “ PRG ”
until one of the above listed functions appears,
then press the programming key placed on the
C.P.U. board (key 1, fig.63) to return to the
selection mode.
After setting a machine, you can memorise the
data in a portable programmer, (FAGE P 3000),
and use those data for other machines of the
same model.
es. a
fig. 65