background image

2

GENERAL INFORMATION - TECHNICAL DATA

GENERAL INFORMATION

The coff ee machine is suitable for preparing espresso 
coff ee by using coff ee beans, and is equipped with a device 
to dispense hot water and brew milk-based products.   
The machine is designed for domestic use and not suitable 
for heavy or professional use.

Warning: No liability is held for damage caused by: 

•  Incorrect use not in accordance with the intended purposes. 
•  Repairs not carried out by authorized service centers.
•  Tampering with the power cord. 
•  Tampering with any parts of the machine. 
•  Use of non-original spare parts and accessories. 
•  Failure to descale the machine or machine use at temperatures 

below 32°F (0°C).

IN THESE CASES, THE WARRANTY SHALL BE DEEMED NULL 
AND VOID.

THE WARNING TRIANGLE INDICATES ALL 
IMPORTANT INSTRUCTIONS FOR THE USER'S 
SAFETY. PLEASE FOLLOW THESE INSTRUCTIONS 
CAREFULLY TO PREVENT SERIOUS INJURIES.

HOW TO USE THESE INSTRUCTIONS

Keep these operating instructions in a safe place and make them 
available to anyone else who would use the coff ee machine. For 
further information or in case of problems, please refer to the an 
authorized service center. 

SAVE THESE INSTRUCTIONS 

INSTRUCTIONS FOR THE POWER SUPPLY CORD

•  A short power-supply cord is provided to reduce risks resulting 

from becoming entangled in or tripping over a longer cord.

•  Extension cords may be used if care is exercised in their use.

If an extension cord is used, make sure: 

a.  The marker electrical rating of the extension cord 

should be at least as great as the electrical rating of the 
appliance.

b.  The extension cord should be arranged so that it will not  

drape over the counter top or table top where it can be 
pulled on by children or tripped over.

c. 

If the appliance is of the grounded type, the extension 
cord should be a grounding-type 3-wire cord.

•  Do not use multi-sockets

TECHNICAL DATA

Nominal voltage

See label on the appliance

Power rating

See label on the appliance

Power supply

See label on the appliance

Shell material

Thermoplastic material/Metal

Size (w x h x d) 

245 x 360 x 420 mm 

Weight

13.4 Kg

Cord length

1200 mm

Control panel

Front

Water tank

1.5 liters - (removable) 

Coff ee bean hopper capacity

300 grams

Pump pressure

15 bar 

Boiler

Stainless steel

Coff ee grinder

Ceramic

Quantity of ground coff ee

7 - 10,5 g

Dregdrawer capacity

about 11

Safety devices

Boiler pressure safety valve – Double safety thermostat.

Summary of Contents for Energica





















































Reviews: