manualshive.com logo in svg

Saeco Energica, Operating Instructions Manual

Share
Download
Saeco Energica Operating Instructions Manual Download Page 39

34

9

5

6

4

7

8

MILK CIRCUIT MAINTENANCE

The milk circuits can be sanitized by carrying out a simple and quick cycle allowing for a thorough cleaning. This wash completes the 
maintenance process of the milk container. We recommend that you carry out this cycle on a monthly basis by using the Saeco detergent, 
which can be purchased at your local dealer, at the Philips on-line shop at http://shop.philips.com or at authorised service centres.

WASH CYCLES CANNOT BE STOPPED.
DO NOT LEAVE THE MACHINE UNATTENDED DURING THIS OPERATION.

MENU -> MACHINE MENU -> MAINTENANCE

The carafe must be removed from the 
machine and its content emptied.
Disengage the handle by rotating it 
clockwise.

Fill the carafe with fresh drinking water 
up to the MAX level.
Add the content of a detergent packet to 
the milk carafe.

Press on the sides and lift the lid.

Place the lid back and ensure that it is 
closed correctly.

Press the "OK" button to confi rm.

Move the handle back to its central 
position to allow for perfect closure.

MAINTENANCE

Insert the carafe inclined towards the 
front.
The carafe base should be positioned on 
the hole (E) located on the drip tray.

BREW GROUP CLEAN

CARAFE CLEANING

DESCALING

MAINTENANCE

1

REFILL

WATER TANK

OK

3

Select the option from the "CARAFE 
CLEANING" menu.
Press the "OK" button to confi rm.

Fill the tank with fresh drinking water up 
to the "MAX" level. 
Press the "OK" button to confi rm.

START CARAFE 

WASHING?

OK

ESC

2

Summary of Contents for Energica





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands