32
OK
EMPTY TRAY UNDER
BREW GROUP
11
OK
FILL HALF CARAFE
WITH WATER. INSERT
IN BREW. POSITION
12
The descaling cycle is activated.
The bar shows the cycle's progress.
If the containers need to be emptied,
press the "PAUSE" button.
Then, press the "START" button when the
container has been emptied and replaced.
At the end of the fi rst step, when the
descaling solution is fi nished, the
machine will require a tank rinse.
Empty the drip tray placed under the
dispensing spout (page 36) and then
replace it on the machine.
Then, press the "OK" button.
Empty the drip tray placed under the
dispensing spout (page 36) and replace it
back onto the machine.
Then, press the "OK" button.
Fill half the carafe with fresh water
(page 34).
Insert the carafe and place it in the
brewing position. Then, press the "OK"
button.
Completely empty the carafe (page 34)
and fi ll it with fresh water.
Insert the carafe in the brewing position,
and then press the "OK" button.
A default amount of water is needed for the rinsing step.
This allows performing an ideal rinse cycle to ensure the best conditions to brew products.
The message about fi lling the tank for the rinse cycle is normal, as it is part of the procedure.
MAINTENANCE
PAUSE
STEP 1/2 DESCALING
7
PAUSE
STEP 1/2 DESCALING
8
RINSE TANK &
FILL WITH WATER
OK
9
RINSE TANK &
FILL WITH WATER
OK
10
EMPTY TRAY UNDER
BREW GROUP
OK
4
EMPTY TRAY UNDER
BREW GROUP
OK
11
PLACE A CONTAINER
UNDER
CARAFE DISP SPOUT
OK
6
FILL HALF CARAFE
WITH WATER. INSERT
IN BREW. POSITION
OK
5
FILL HALF CARAFE
WITH WATER. INSERT
IN BREW. POSITION
OK
12
Rinse the tank and fi ll it again with
fresh drinking water up to the "MAX"
level.
Then, press the "OK" button.
Place a container under the carafe
dispenser.
Then, press the "OK" button.