21
1
2
3
BEVERAGE LENGTH QUICK PROGRAMMING
BREWING MAY BE PRECEDED BY SHORT SPURTS OF MILK AND STEAM: RISK OF SCALDING! REFER TO THE SECTION
"MILK CONTAINER USE".
This section shows the programming procedure for the Cappuccino. This is meant as an example to introduce you to the steps necessary for
a quick and easy programming of all the beverages.
After a quick programming of the beverage, it is possible to carry out a fi ner and more detailed adjustment by means of the "BEVERAGE
MENU" (see page 22).
Rotate the upper part of the container
handle on the cup. Use your everyday
cup.
The machine starts brewing: coff ee is
ground and milk is heated up to prepare
for dispensing.
Milk dispensing begins. When the
desired quantity has been reached, press
"STOP".
Once milk has been dispensed, the
machine starts brewing the coffee. When
the desired quantity has been reached,
press "STOP".
Beverage length has been programmed. From now on, this length will be applied to the brewing of this beverage.
For the other beverages: hold pressed the button of the beverage to be programmed and follow the same procedure.
Insert the milk carafe.
Place the cup or the container where
the cappuccino or latte macchiato will
be brewed.
Hold the button pressed until "MEMO"
is displayed in order to start the
programming procedure.
CAPPUCCINO
PLEASE WAIT …
MEMO
4
CAPPUCCINO
MEMO
STOP
5
CAPPUCCINO
MEMO
STOP
6
