ENGLISH
• 25 •
•
(Fig.15) -
Remove the “Crema” filter holder
from the machine by turning it from right to
left and empty out any water inside it.
• Fit the pod into the filter holder; make sure
the pod paper does not come out from the
filder holder.
•
(Fig.10) -
Fit the “Crema” filter holder into
the brew unit (8) from below.
•
(Fig.11) -
Turn the filter holder from left to
right until it locks into place.
•
(Fig.12) -
Take 1 pre-warmed cup and put
it beneath the filter holder; make sure it
is correctly positioned beneath the coffee
dispensing nozzles.
•
(Fig.13) -
Press the coffee button (4).
• When you have dispensed the desired
amount of coffee, press the coffee button
(4) again to stop flow and remove the cup
containing the coffee
(Fig.14)
.
•
(Fig.15) -
After dispensing, wait some
seconds, remove the filter holder, and
dispose of the pod used.
Cleaning note: keep the coffee
filter clean by detaching it from the
“Crema” filter holder and washing it with
drinking water (Fig.16).
6
CHOOSING THE TYPE OF
COFFEE - TIPS
Generally speaking, you can use any type of
commercially available coffee.
However, coffee is a natural product and its
flavour will vary depending on where it comes
from and the blend used; it is thus a good idea
to try out different types until you find the one
that best suits your personal taste.
For best results you should use blends specifically
prepared for espresso coffee machines.
Coffee should flow out smoothly from the
“Crema” filter holder without dripping.
The speed of flow can be adjusted by slightly
changing the amount of coffee in the filter and/
or using coffee with a finer or coarser grind.
B E F O R E A T T E M P T I N G A N Y
OPERATION INVOLVING THE
RELEASE OF STEAM OR HOT WATER,
MAKE SURE THAT THE STEAM TUBE
(“PANNARELLO”) IS POSITIONED OVER
THE DRIP TRAY.
7
DISPENSING HOT WATER
Danger of scalding! Brief sprays of
hot water may be discharged at first.
The dispensing tube can reach very high
temperatures: avoiding touching it directly
with your hands.
•
(Fig.4B) -
If the machine is off, turn it on by
pressing the ON/OFF switch (2); the light (3)
will go on.
• Wait until the temperature ready light (5) goes
on.
•
(Fig.17) -
Place a container or mug beneath
the steam tube (“pannarello”).
Turn the “Hot water/steam” knob (7)
counterclockwise to open.
•
(Fig.18) -
Press the coffee button (4) to
dispense hot water.
• When you have dispensed the desired quantity
of hot water, press the coffee button (4)
again.
•
(Fig.19) -
Turn the knob (7) clockwise to
close. Remove the container of hot water.
8
D I S P E N S I N G S T E A M /
MAKING CAPPUCCINO
Danger of scalding!
The steam may be preceded by brief
sprays of hot water. The dispensing tube
can reach very high temperatures: avoiding
touching it directly with your hands.
•
(Fig.4B) -
If the machine is off, turn it on by
pressing the ON/OFF switch (2); the light (3)
will go on.
•
(Fig.20) -
Press the (6) steam switch. The
temperature ready light will go off (5).
• Wait until the temperature ready light (5)
goes back on. Now the machine is ready to
Choosing the type of coffee - Making cappuccino
4316036000 - SIN024X Rev00.indd 25
10/05/2004 11.57.18
