45
2
1
3
A
��������
Adjusting the drive chain
-
Loosen the axle nut (1).
-
Adjust the setting nuts (2) evenly on both
sides of the chain tensioner (rear wheel
must be in line with the front wheel).
-
Let the rear end of the motorbike drop
to the suspension limit.
-
Push in the drive chain up half way
between sprocket and pinion. Measure
the travel.
Adjusting the chain
CAUTION
The adjustment of the chain influences
the wear of chain and sprocket.
It is essential to have the tightening
torques checked by a Sachs-dealer.
Too tight adjustment of the chain will
cause bearing damage on engine and
rear wheel and result in excessive wear
of the chain.
Nominal value: A = 30-35 mm
-
Tighten the axle nut (1).
-
Tighten setting nuts (2) on both sides.
Torque
Axle nut (1):
50-60 Nm
Setting nuts (2):
22-35 Nm
NOTES ON MAINTENANCE
