43
3
4
7
5
2
1
6
9
8
Installing the rear wheel
CAUTION
Do not damage brake disc and linings
during installation! Have a Sachs dealer
check the tightening torques.
-
Clean and grease the full floating axle
(4).
-
Introduce full floating axle (4), chain
adjuster (7), brake support (8) with brake
caliper (6) into rear suspension.
-
Insert right chain adjuster (2) and
reassemble with axle nut (1).
-
Adjust the drive chain (5).
(see adjusting drive chain).
-
Tighten axle nut (1).
Torque
Axle nut (1):
50-60 Nm
NOTE
Insert brake support into the guide (9) of
rear suspension.
-
Install the drive chain (5).
-
Install rear wheel with spacer bush (3)
and full floating axle (4).
NOTES ON MAINTENANCE
