![background image](http://html1.mh-extra.com/html/sabo/102-13g/102-13g_instruction-manual_3170552073.webp)
ENG 18
CONTROLS AND INSTRUMENTS
move the lever as per the indications on the label.
Reverse must only be engaged when the machine is
stopped.
For hydrostatic drive models:
4.31 B
RAKE PEDAL
This pedal works the brake on the rear wheels.
4.32 D
RIVE ENGAGEMENT PEDAL
This pedal engages drive in the wheels as well as modulating the machine's
forward and reverse speeds.
– To engage forward drive just press it in the «F» direction with your toe-cap,
noting that increasing the pres-
sure on the pedal progressively
increases the speed of the
machine
– Reverse is engaged by pressing
the pedal with the heel, in the
«R» direction.
– The pedal automatically goes
into neutral «N» when released.
– The neutral condition «N» is
shown by the lighting of a pilot
lamp (4.7.h).
Reverse must
only be engaged when the
machine is stopped.
If the drive
pedal is used, whether forwards
or for reverse, when the parking
brake (4.5) is engaged, the engi-
ne stops..
NOTE
!
WARNING!
➤
!
WARNING!
4.32
N
F
R
A
B
4.31
4.33