MOBILIFT ECO 650
16
3. Tighten the body to the cart according to the fig. 3.
UWAGA:
Remember to lead lifts cables through the opening in the cart.
4. Installing the cover with blind (fig. 4).
STEP 1: Lay the cover in front of the cart. Stretch the blind to ease the installation.
NOTE:
Do not pull the blind's red safety pin in this step.
fig. 3
7x screws ISO 4762 M8x25 to the bottom side
2x screws ISO 7380 M8x25 to the back side
STEP 2: Start inserting the blinds bracket
from the lower side of the reinforced body
accordingly to the drawing below. The blinds
material should be under the lifts body.
STEP 3: Tighten the blinds bracket. Use two
of the included screws ISO 7380 M5x16
STEP 4: Put the cover on the cart and tighten
with 4 screws ISO 7380 M4x8
STEP 5: Unlock the blind's red safety pin.
fig. 4
