Motor Support
(H0143-S)
BAG 7-3
Socket Head Cap
Shoulder M4x15mm
(HC103-S)
Socket Head Cap
Screws M3x10mm
(HC056-S)
Note:
Using H0726 ( accessory not included in
the kit ) you can easily tighten the assembly
onto the engine shaft.
With a 6mm hex driver, you can tighten
the clutch unit.
IMPORTANT:
Tighten first the clutch unit with a hex
tool against the engine bearing. Only after
this step, tighten the 2 M3x10 screws.
Motor Assembly
Motor Belt
(HC472-S)
Socket Head Cap
Screws M3x10mm
(HC056-S)
Engine
Crank Clamp
(H0726-S)
Washer 10x 15x0.75mm
( Supplied with The Engine )
Engine
Washer
Clutch Unit
HEX 6mm
Note:
Do not add loctite on the engine shaft
Clutch Unit
Page 12
Chapter 8, Engine Unit Assembly
