SAB Heli Division Goblin 630 User Manual Download Page 3

Page: 3 / 48

7 – Tail assembly

8 – Assembling the modules

9 – Installation of swashplate servos

10 – Installation of the ESC

11 – Installation of Flybarless unit and RX

12 – Installation of the motor

1 – Introduction

2 – Important notes

3 – Components and Box

4 – Carbon frame assembly

5 – Trasmission module

6 – Main rotor

INDEX

The Goblin

is a high performance radio controlled helicopter.

The design is original, moving away from traditional schemes, searching rationality for simplicity.

Our goal was to create a simple, high performance helicopter, with a minimum of mechanical components,

and simple maintenance.

Please read this user manual carefully, it contains instructions for the correct assembly of the model.

Please refer to the web site www.goblin-helicopter.com for updates and other important information.

Thank you for your purchase, and have a great time with your Goblin!

SAB Heli Division.

13 – Installation of the boom

14 – Battery and Canopy

15 – In flight

16 – Maintenance

17 – Exploded views

18 – Spare parts

1428mm

1290mm

0mm

4mm

Main rotor diameter: 1428mm (with 630mm blades)

Main blade length: 600 to 630mm

Tail rotor diameter: 278mm

Tail blade length: 105mm

Main shaft diameter: 12mm

Tail shaft diameter: 6mm

Spindle diameter: 10mm

Weight including standard electronics: 3220g (excluding batteries).

Motor size: Maximum 64mm diameter, maximum height 64mm

Battery compartment: 60x58x350mm (adaptable to 64x58x350mm)

SPECIFICATIONS

Page 1

Chapter 1, Introduction

Summary of Contents for Goblin 630












































Search results

Summary of Contents for Goblin 630

Reviews:

Related manuals for Goblin 630

Brands by name

Popular brands

SAB Heli Division Goblin 630, User Manual

Search results

Summary of Contents for Goblin 630

Reviews:

Related manuals for Goblin 630

Brands by name

Popular brands