264
Car care
4 Connect the air hose from the compres-
sor to the connection on the canister.
5 Insert the canister into the recess in the
compressor.
6 Unscrew the valve cap from the punc-
tured wheel.
7 Connect the air hose from the canister to
the valve on the wheel.
8 The switch on the compressor must be
in the 0 position.
9 Connect the compressor’s electric cable
to the 12 volt socket (cigarette lighter) in
the car.
10 Start the compressor.
11 While the canister of sealant empties
(approx. 30 seconds), the gauge on the
compressor will briefly show a pressure
of up to 87 psi (6 bar). The pressure will
then drop.
12 Once the canister is empty, pump the
tire to the recommended tire pressure
(see page 291). It is not necessary to
remove the canister.
13 The tire should be inflated to the recom-
mended pressure within 10 minutes.
Switch off the compressor once the
correct pressure is reached.
93_US_7carcare_MY09.fm Page 264 Tuesday, April 15, 2008 11:26 AM
