8 32 025 688
Saab 9-5 4D M06-
37 Attach the ground cable to the grounding point
in the luggage compartment below the left-hand
tail lamp.
38 Run the thicker section of the wiring harness
toward the left-hand wheel housing and the thin-
ner section along the luggage compartment sill
to the right-hand side of the car.
39 Plug the connector into the provision for the tow-
bar wiring harness.
Cars with towbar:
Unplug the connectors and
plug both wiring harness connectors into them.
40 Plug the wiring harness connector into the pro-
vision for the CD changer and fit the blind plug
to the SPA harness connector. Affix anti-rattle
tape and secure with a cable tie to avoid rattle.
Cars with CD changer:
Unplug the connectors
and plug each wiring harness connector into
them. Affix anti-rattle tape and secure with a
cable tie to avoid rattle.
41 Insert the screws in the control module holes,
connect the wiring harness to the control mod-
ule, and fit the control module with connectors
facing down onto the plate behind the rear seat
backrest. Tighten the screws.
42 Use cable ties (x17) to secure the wiring har-
ness along its entire route. Gather excess wiring
harness and secure it above the wheel housing.
E930A408
42
42
41
42
39
42
42
40
42
42
42
42
37
42
