SA Sport 365 Assembly Instructions Manual Download Page 11

Page: 11 / 12

365 / Instruction #8920101 Rev 4

Pg. 11

SECTION IV

SPARE PARTS

Note: For JFK double locking Uprights &

Cantilever Bars only

Locking Handle Assembly – 1 Pair

Part# P355-25PR

Snap Lock Assembly– 1 ea.

Part# P355-140A

(Secondary Locking Device)

Note: For JFK Single locking Uprights only

JFK Spin - Snap Lock – 1 ea.

Part# P355-254A

(Combination Locking Handle and Snap Lock)

Clamp Assembly – 1 ea.

Part# P355-248A

(new part fits prior applications)

Fiberglass Rail with
Wood Veneer Assembly – 1 ea.

Part# 355-65

- c/w mounting hardware (2” bolts)

Note: You must use your existing 3” bolts, but

must exchange the old Nylock Nut with the
Nylock nut that is supplied with your new
Rail.

Cantilever Upright Tube – 1 ea.

Part# 355-510

- c/w Rail Pivots

Horizontal Adjusting Tube, Right – 1 ea.

Part# 355-520

- c/w Rail Pivots

Horizontal Adjusting Tube, Left – 1 ea.

Part# 355-521

- c/w Rail Pivots

High Adjusting Assembly, Right – 1 ea.

Part# 355-540

- c/w Rail Pivots & Locking Devices

High Adjusting Assembly, Left – 1 ea.

Part# 355-541

- c/w Rail Pivots & Locking Devices

Obsolete Part

Summary of Contents for 365













Search results

Summary of Contents for 365

Reviews:

Related manuals for 365

Brands by name

Popular brands

SA Sport 365, Assembly Instructions Manual

Search results

Summary of Contents for 365

Reviews:

Related manuals for 365

Brands by name

Popular brands