355 JUST FOR KIDS
Assembly Instructions
Page 20 of 25
5. Prepare to slide the Rail & Adjusting Tube Assembly into the Upright
Assembly (See Fig. 12). Lower the Rail & Adjusting Tube Assembly into
the Uprights. Pull outward on the Snap Lock Device. Once the Adjusting
Tube reaches the pin, lower the rail while releasing the Snap Lock
Device until the 1
st
Adjusting Tube hole allows the pin to fall into the
locking hole. The Snap Lock Device is now engaged.
To avoid injury while lowering the rail into position, keep
hands well clear of the adjusting tubes where they slide into
the Uprights.
6. Position the rail at a height that will be comfortable to work with during
the set-up of the apparatus and engage the Snap Lock Device so that
the pin drops into a hole. Tighten the Spin Lock portion securely by
turning it clockwise.
7. Thread now the 3/8” Flat Head Screw to attach the uprights to the base
tube firmly.
8. If you are assembling the Just for Kids Parallel Bars or Uneven Bars,
repeat Steps 1 through 6 with the second Upright Assembly and Rail &
Adjusting Tube Assembly.
To avoid possible injury and/or damage to the first Rail &
Adjusting Tube Assembly while working with the second
Upright, ensure that the first Assembly is either mounted &
locked to the Bases or well clear of the working area and
cannot be accidentally tipped over.
Fig. 12
