![S+S Regeltechnik AERASGARD FSLQ Operating Instructions, Mounting & Installation Download Page 7](http://html1.mh-extra.com/html/s-s-regeltechnik/aerasgard-fslq/aerasgard-fslq_operating-instructions-mounting-and-installation_3273800007.webp)
7
Maintenance-free air-quality sensor
AERASGARD
®
FSLQ
with active output, automatic calibration, in the in-wall housing, for determining the air
quality (0…100 % VOC). The measuring transducer converts the measured variables into a standard signal of 0 -10 V. The in-wall sensor is mounted
in high-quality panel switch programmes, ideally of the brands Gira, Berker, Merten, Jung, Siemens or Busch-Jaeger (using in-wall adapters) either
individually or in combination with light switches, socket outlets, etc.
The sensor is used in offices, hotels, convention centres, apartments, shops, etc. and is used for evaluating the indoor climate.
This enables energy-saving room ventilation on an as-needed basis, thereby reducing operating costs and improving well-being.
The air quality is detected by a
VOC sensor
(mixed gas sensor for volatile organic substances). This determines the pollutant loading of the room
air by contaminated gases such as cigarette smoke, body vapours, breathing air, solvent vapours, emissions, etc.
TECHNICAL DATA
Power supply:
24 V AC ⁄ DC (± 10 %)
Power consumption:
typically < 2.0 VA ⁄ 24 V AC; typically < 1.0 W ⁄ 24 V DC
AIR QUALITY (VOC)
Sensor:
VOC sensor (metal oxide)
with automatic calibration
(VOC = volatile organic compounds)
Detection of the gases is not selective
Measuring range:
0...100 % air quality (with reference to the calibration gas)
Measuring accuracy:
typically ± 20 % final value (with reference to the calibration gas)
Service life:
> 60 months (under normal load conditions)
Warm-up time:
approx. 1 hour
Response time:
< 60 s
Output:
0 - 10 V (0 V = clean air, 10 V = polluted air)
(low to elevated room air pollution load)
Mounting:
in-wall flush box Ø 55 mm
Electrical connection:
max. 1.5 mm², via push-in terminals
Ambient temperature:
Storage –20...+50 °C;
Operation 0...+50 °C
Permitted humidity:
max. 95 % RH, non-condensing air
Medium:
clean air and non-aggressive, non-combustible gases
Protection class:
III (according to EN 60 730)
IP rating:
IP 20 (according to EN 60 529)
Standards:
CE-conformity, electromagnetic compatibility
according to EN 61 326, EMC Directive 2014 ⁄ 30 ⁄ EU
SWITCH PROGR AMME
Manufacturer:
GIRA System 55
(other switch programmes, manufacturers, colours as well as prices available upon request)
Housing:
plastic, the standard colour is pure glossy white (similar to RAL 9010)
(other colours are available upon request with colour variants
depending on the respective light switch programme)
G
AERASGARD
®
FSLQ
Rev. Data - V20
Type ⁄ WG01
Measuring range
VOC
Output
VOC
Item No.
FSLQ
FSLQ-U
0...100 %
0 -10 V
1501-5120-1000-162
Note:
This unit must
not
be used as a safety-relevant device!