2. Follow below steps to replace the receiver.
a. Loosen the screws of servo horns, take the servo horns off.
b. Unplug the motor cable and the mainwing servo cable. You may need to record the
direction of cable plugs.
c. Loosen the screws as shown to take off the the receiver.
10 / 11
Find a Flight Field
or other area that is large enough and free of people and obstructions. We recommend
lots, crowded neighborhood areas or in areas that are not free of people or obstructions.
NOTE: This checklist is NOT intended to replace the content included in this instruction
manual. Althought it can be used as a quick start guide, we strongly suggest that read
all though the manual completely before proceeding.
- Ensure the throttle control stick is at bottom position before connecting the battery.
- Unplug the battery.
- Always turn off the transmitter last.
Flight Checklist
3. Follow below steps to replace the motor.
a. Unplug the motor cable from receiver board. You may need to record the direction
of cable plug.
c. Loosen the screws as shown to take off the the motor.
Screws
is a much more forgiving surface that
causes less damage in the unfortunate
event or a crash. Short grass is better
for takeoffs and landings as grass that is
too long can cause the airplane to nose-
area allows for takeoffs and landings on
a smoother surface(such as asphalt) and