Propeller Saver Instruction
The propeller saver keeps the propeller
from damage, and prevent the electronic
components from over current. When the
airplane hits any obstacle, the propeller will
loose from the base. To install the propeller
back to the base, insert the upper part
centerly through the motor shaft, and hearing
a "click" sound to ensure it is secured.
Base
Upper
Part
9 / 11
Follow below steps to replace broken propeller
and shaft adaptor. You will need help of a Philips
screw driver and pliers(not included).
1. Take off the spinner and propeller by loosen
the screw with a Philips screw driver.
2. Take off the shaft adaptor carefully. If it is too
tight, use pliers to help.
3. Replace any part broken.
4. Install all parts back by inverted orders to
finish replacement.
1. Take off the cover in the head of fuselage to replace the motor, or the cover in the
middle of fuselage to replace the receiver. It is no need of tool to take off the covers.
Base
Upper
Part
Spinner
Screw
Propeller
Power System Replacement
Screws
Screws