7 / 11
Place your plane in a neutral position, follow below steps to check the channels reactions.
Move the sticks(except the throttle stick) to see if all servo surfaces react correctly as
shown in the left diagram(left throttle for example). Swing your plane to check if all servo
surfaces react correctly as shown in the right diagram.
Swing The
Plane
X-PILOT Reaction
Transmitter
Operaton
Reaction
One-key Aerobatics Instruction
The one-key aerobatics feature allows beginner pilot to
perform aerobatic actions by simply pressing the button
on transmitter.
key aerobatics button, the transmitter will beep several
times. During the beeping, simply move the aileron stick
to either direction for auto-roll. Or move the elevator stick
One-key Aerobatic
Digital Trims
Digital trims allow to adjust the centered
position of aileron, rudder or elevator hinge.
Each time when a trimmer is moved, the
servo output will change one angle. If the
trimmer is held, the output will scroll in that
direction until the trimmer is released or the
output reaches its end. When you hear a
short "beep" sound, it means the trimmer is
centered.
Elevator
Trimmer
Rudder
Trimmer
Aileron
Trimmer
Channels Reactions Checking