E-10
USING THE AUDIO LINE IN CONNECTION (AUX-INPUT)
- You can connect the audio output of an external device such as a MP3 player or a TV to
this unit, to listen to the sound of that device through the high quality amplifi er of this
music system.
- To connect the external device please use a standard stereo headphone (3.5mm to 3.5mm
plugs) cable to connect the “Headphone-out or Audio line-out” of the device to the AUX-
input socket of this unit.
- Switch the function to “AU” (AUX) using the
FUNCTION
key.
- Switch on the unit and the external device (eg. MP3-player or TV).
- Start playback of the external device and adjust the volume control of the main unit to the
desired level.
- Remember to switch off the unit when you are fi nished using the external device.
DIMMER FUNCTION
This set has a dimmer function to adjust the brightness level of the display backlight. Simply
adjust it as desired by the dimmer switch (Max / Mid / Min.) which is located at the rear of
unit, to reduce eye strain, and to save energy.
NIGHT FUNCTION
The display backlight can be switched on and off by pressing & hold (for 2 seconds) the
“night” key (on remote control).
CONNECTING AN EXTERNAL POWERED SUBWOOFER (NOT INCLUDED)
- This system is equipped with a subwoofer connector which can be connected to any
standard powered subwoofer.
- Connecting a amplifi ed subwoofer to the HIFI system will greatly enhance the bass (low
frequency) sounds, providing a much richer, deeper & more powerful musical experience.
- To use this facility, simply connect any standard powered subwoofer (easily available from
most music equipment stores) using the rca connector on the rear panel of the main unit.
- Switch on the powered subwoofer.
- Play any music source as usual.
- You will immediately notice the deeper sound.
- Please note that the speakers should be connected as usual to the main unit, when using a
subwoofer.
- Please note that “passive” (non-amplifi ed) subwoofers will not work with this unit.
GENERAL FUNCTION
