E-7
ALARM FUNCTION
- This set is equipped with 3 alarm modes: buzzer, radio and iPod. Before setting the alarm,
make sure to set the clock (see “digital clock function” in the pervious section) .
PREPARE FOR THE ALARM SETTINGS
Press the
ON/STANDBY
key to switch on the set (display blue light will be “on”).
1. FOR iPod
: Connect the iPod as described.
Select the song or the desired playlist to play at the “wake up” time.
Start and pause playback of the song/playlist at the point from which
you want playback to begin at the “wake up” time.
FOR RADIO : Tune in the desired station.
2. Adjust the volume level as desired by pressing
VOL. UP +
or
VOL. DN -
key.
“ALARM” TIME SETTING
1.
Press the
ON/STANDBY
key to put the set into “Standby” mode (blue light off).
2. Press and hold
ALARM
key (on remote control) until the alarm symbol “
”appears
in the display. The display will now show:
3.
Press
and
to reach the hour of the desired wake up time then press
ALARM
key to confi rm. The display will now show:
4.
Press
and
to reach the minutes of the desired wake up time, then press the
ALARM
key to confi rm.
5. Now select the source that you wish the unit to play at the “wake up” time as below:
*Remark:
= Buzzer Alarm /
= Radio /
= iPod
Once the desired source has been selected, press the
ALARM
key to confi rm.
DIGITAL CLOCK