4
Extension tube with car tire valve adapter, bicycle tire adapter,
universal adapter, needle ball adapter.
1. ON/OFF switch trigger
2. LED work-light
3. Air pressure gauge
4. Extension tube
5. Car tire valve adapter
6. Bicycle tire adapter
7. Needle ball adapter
8. Universal adapter
9. Air outlet
10. Lock nut
11. Battery pack (Not included)
12. Battery clip
1. Make sure that the tool is only connected to the voltage
marked on the name plate.
2. Never use the tool if its cover or any bolts are missing. If
the cover or bolts have been removed, replace them
prior to use.
Maintain all parts in good working order.
3. Always secure the tool when working in elevated
positions.
4. Never touch the blade, drill bit, grinding wheel or other
moving parts during use.
5. Never start the tool when its rotating component is in
contact with the work piece.
6. Never lay the tool down before its moving parts have
come to a complete stop.
7.
ACCESSORIES:
The use of accessories or attachments
other than those recommended in this manual might
present a hazard.
8.
REPLACEMENT PARTS:
When servicing use only
identical replacement parts.
1. Observe the maximum pressure. Do not inflate any items
to excess pressure.
2. Only use the appropriate charger adapter suitable for the
separately sold batteries.
3. The knurled ring must be firmly tightened, and may not be
loosened while in use, especially when using the appliance
with adapters fitted.
4. On no account should you point the air outlet towards any
persons or animals.
INSTRUCTIONS FOR SAFE HANDLING
CORDLESS AIR INFLATOR SAFETY PRECAUTIONS
Li-ion batteries must be recycled.
Take the battery to the shop from which it was purchased as
soon as the post-charging battery life becomes too short for
practical use.
Do not discard the exhausted battery.
DISPOSAL OF THE EXHAUSTED BATTERY
DESCRIPTION
Voltage ............................................................................18V
Max air pressure ...............................................8bar - 116psi
Max air flow................................................................. 8ℓ/min
Working time ………………………….….….30min (XB-3000)
Net weight (not incl. battery pack) ………………….….0.8kg
SPECIFICATIONS
STANDARD ACCESSORIES
COMPATIBLE BATTERY PACK AND CHARGER
SWITCH (Fig. 1)
WARNING!
BATTERY PACK (not included) ...... XB-1500, XB-3000
CHARGER (not included) ............... XPP-2700
This tool is started and stopped by depressing and releasing
the ON/OFF switch trigger (1).
LED WORK LIGHT (Fig. 1)
There is a LED work-light (2) in the front of this air pump. The
LED light can light prior to motor running if you depress the
ON/OFF switch trigger lightly, which keep the work area lighted
for checking clearly at first and it lights also during operation.
AIR PRESSURE GAUGE
The air pressure gauge (3) equipped on the inflator is not
calibrated and the readings provided are rough indication only.
If you inflate car tire with this tool, check the tire pressure
using a calibrated air pressure gauge before driving your car.
ATTACHING AND REMOVING THE ADAPTER
OR EXTENSION TUBE (Fig. 2, 3, 4)
・
The extension tube (4) can be fit to the air outlet (9) directly.
・
The universal adapter (8) and needle ball adapter (7) have
to be fitted to the car tire valve adapter (5) at the end of
the extension tube.
・
The bicycle tire adapter (6) can be fit either directly on the
air outlet or on the car tire valve adapter at the end of the
extension tube.
To attach:
1. Ensure the adapters and extension tube are always clean.
2. Loosen the lock nut (10) by turning it counterclockwise.
3. Twist and push the adapter or the extension tube completely
into the air outlet.
4. Tighten the lock nut by turning it clockwise.
・
Do not stare directly at the light beam. Never aim the beam
at any person or an object other than the work piece.
・
Do not deliberately aim the beam at personnel and ensure
that it is not directed towards the eye of a person for longer
than 0.25s.
