5
・
Always use the extension tube when working on
hard-to-reach places.
・
Use only the accessories and extension tube originally
supplied with the tool.
USING THE ADAPTORS WITH THE EXTENSION
TUBE (Fig. 3)
INSTALLING AND REMOVING BATTERY
PACK (Fig. 5)
・
Always observe the maximum pressure rating specified
by the manufacturer of the article you wish to inflate.
Never inflate products to a pressure greater than that
allowed by the manufacturer; exploding objects can
cause severe injuries.
・
The metal parts on the extension tube and the adapter can
become very hot. Allow the parts to cool down completely
before touching.
・
All the machine to cool down should it become overheated.
OPERATION
CLEANING
CAUTION:
MAINTENANCE
To ensure safety and reliability, all repairs should be
performed by an AUTHORIZED SERVICE CENTER or
other QUALIFIED SERVICE ORGANIZATION.
SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE.
WARNING!
After use, check the tool to make sure that it is in top
condition. It is recommended that you take this tool to a
RYOBI Authorized Service Center for a thorough cleaning
and lubrication at least once a year.
DO NOT MAKE ANY ADJUSTMENTS WHILE THE
MOTOR IS IN MOTION.
ALWAYS DISCONNECT THE POWER CORD FROM THE
RECEPTACLE BEFORE CHANGING REMOVABLE OR
EXPENDABLE PARTS (BLADE, BIT, SANDING PAPER
ETC.), LUBRICATING OR WORKING ON THE UNIT.
To remove:
Loosen the lock nut by turning it counterclockwise, and remove
the adapter or the extension tube.
1. Attach the extension tube to the tool.
2. Screw the necessary adaptor into the car tire valve adapter
on the extension tube and tighten by hand.
3. Attach the adapter to the valve of the article you wish to inflate.
4. To change the adapter firmly with one hand and turn the
car tire valve adapter on the extension tube.
To install battery pack (11), align the body with the groove in
the battery pack and push in the direction of the arrow until
the battery pack is secured on the tool.
To remove the battery pack from the tool, push the battery
clip (12) on and remove the battery pack in the direction of
the arrow.
Always remove battery pack from your tool when you are
assembling parts, making adjustments, cleaning, or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
Keep the ventilation slots of the machine clean to prevent
overheating of the motor. Regularly clean the machine
housing with a soft cloth, preferably after each use. Keep
the ventilation slots free from dust and dirt. If the dirt does
not come off use a soft cloth moistened with soapy water.
Never use solvents such as petrol, alcohol, ammonia water,
etc. These solvents may damage the plastic parts.
1. Attach the appropriate adapter or the extension tube to
the inflator.
2. Connect the adapter or extension tube to the valve on the
article you wish to inflate.
3. Press and hold the on/off switch trigger to inflate the
object.
4. Observe the machine’s pressure gauge while inflating the
object.
5. Disconnect the machine and the inflated object.
6. Clean the pump and store it in the plastic case.
CAUTION:
