background image

21

 

WARRANTY

EMISSION COMPONENT DEFECT WARRANTY PERIOD

The warranty period for this engine begins on the date of sale to 
the initial purchaser and continues for a period of 2 years.

PARTS COVERED

Listed below are the parts covered by the Emission Components 
Defect  Warranty.  Some  of  the  parts  listed  below  may  require 
scheduled maintenance and are warranted up to the first sched-
uled replacement point for that part.
(1) Fuel Metering System

     (i)  Carburetor and internal parts (and/or pressure regulator 
          or fuel injection system).
     (ii)  Air/fuel ratio feedback and control system, if applicable.
     (iii) Cold start enrichment system, if applicable.
     (iv) Regulator assembly (gaseous fuel, if applicable)

(2) Air Induction System

     (i)  Intake manifold, if applicable
     (ii) Air filter.

(3) Ignition System

     (i)   Spark plugs.
     (ii)  Magneto or electronic ignition system.
     (iii) Spark advance/retard system, if applicable.

(4) Exhaust manifold, if applicable
(5) Miscellaneous Items Used in Above Systems.

     (i)   Electronic controls, if applicable
     (ii)  Hoses, belts, connectors, and assemblies.
     (iii) Filter lock assembly (gaseous fuel, if applicable)

OBTAINING WARRANTY SERVICE

To obtain warranty service, take your engine to the nearest au-
thorized Robin America service dealer. Bring your sales receipts 
indicating date of purchase for this engine. The service dealer 
authorized by ROBIN AMERICA will perform the necessary repairs 
or adjustments within a reasonable amount of time and furnish you 
with a copy of the repair order. All parts and accessories replaced 
under this warranty become the property of ROBIN AMERICA.

WHAT IS NOT COVERED*

Conditions resulting from tampering, misuse, improper adjust-
ment (unless they were made by the service dealer authorized by 
ROBIN AMERICA during a warranty repair), alteration, accident, 
failure to use the recommended fuel and oil, or not performing 
required maintenance services.* The replacement parts used for 
required maintenance services.* Consequential damages such as 
loss of time, inconvenience, loss of use of the engine or equip-
ment, etc.* Diagnosis and inspection charges that do not result in 
warranty-eligible service being performed.* Any non-authorized 
replacement part, or malfunction of authorized parts due to use 
of non-authorized parts.

OWNER’S WARRANTY RESPONSIBILITIES

As the engine owner, you are responsible for the performance of 
the required maintenance listed in your owner’s manual. ROBIN

FEDERAL EMISSIONS COMPONENT DEFECT WARRANTY

EMISSIONS COMPONENT DEFECT WARRANTY COVERAGE

This emission warranty is applicable in all States, except the State of California.

Fuji Heavy Industries Ltd. and Robin America Inc., Wood Dale Illinois, (herein “ROBIN AMERICA”) warrant(s) to the initial retail purchaser 
and each subsequent owner, that this Nonroad engine (herein “engine”) has been designed, built, and equipped to conform at the time 
of initial sale to all applicable regulations of the U.S. Environmental Protection Agency (EPA), and that the engine is free of defects in 
materials and workmanship which would cause this engine to fail to conform with EPA regulations during its warranty period.
For the components listed under PARTS COVERED, the service dealer authorized by ROBIN AMERICA will, at no cost to you, make 
the necessary diagnosis, repair, or replacement necessary to ensure that the engine complies with applicable U.S. EPA regulations.

AMERICA  recommends  that  you  retain  all  receipts  covering 
maintenance on your engine, but ROBIN AMERICA cannot deny 
warranty solely for the lack of receipts or for your failure to ensure 
the performance of all scheduled maintenance.
As the engine owner, you should however be aware that ROBIN 
AMERICA may deny warranty coverage if your engine or a part 
has failed due to abuse, neglect, improper maintenance or unap-
proved modifications.
You  are  responsible  for  presenting  your  engine  to  the  nearest 
service dealer authorized by ROBIN AMERICA when a problem 
exists.
If  you  have  any  questions  regarding  your  warranty  rights  and 
responsibilities, you should contact the Robin America customer 
service department at 1-630-350-8200 for the information.

THINGS  YOU  SHOULD  KNOW  ABOUT  THE  EMISSION 
CONTROL  SYSTEM  WARRANTY  MAINTENANCE  AND 
REPAIRS

You are responsible for the proper maintenance of the engine. You 
should keep all receipts and maintenance records covering the 
performance of regular maintenance in the event questions arise. 
These receipts and maintenance records should be transferred to 
each subsequent owner of the engine. ROBIN AMERICA reserves 
the right to deny warranty coverage if the engine has not been 
properly maintained. Warranty claims will not be denied, however, 
solely because of the lack of required maintenance or failure to 
keep maintenance records.
MAINTENANCE, REPLACEMENT OR REPAIR OF EMISSION CON-
TROL DEVICES AND SYSTEMS MAY BE PERFORMED BY ANY 
REPAIR ESTABLISHMENT OR INDIVIDUAL; HOWEVER, WAR-
RANTY REPAIRS MUST BE PERFORMED BY A SERVICE DEALER 
AUTHORIZED BY ROBIN AMERICA. THE USE OF PARTS THAT 
ARE NOT EQUIVALENT IN PERFORMANCE AND DURABILITY 
TO AUTHORIZED PARTS MAY IMPAIR THE EFFECTIVENESS OF 
THE EMISSION CONTROL SYSTEM AND MAY HAVE A BEARING 
ON THE OUTCOME OF A WARRANTY CLAIM.
If other than the parts authorized by ROBIN AMERICA are used 
for maintenance replacements or for the repair of components 
affecting emission control, you should assure yourself that such 
parts are warranted by their manufacturer to be equivalent to the 
parts authorized by ROBIN AMERICA in their performance and 
durability.

HOW TO MAKE A CLAIM

All repair qualifying under this limited warranty must be performed 
by a service dealer authorized by ROBIN AMERICA. In the event 
that any emission-related part is found to be defective during the 
warranty period, you shall notify Robin America customer service 
department at 1-630-350-8200 and you will be advised of the 
appropriate warranty service dealer or service providers where 
the warranty repair can be performed.

Summary of Contents for RY80030



























Reviews: