background image

22

WARRANTY

 

A. COMMENCEMENT DATE
The warranty period begins on the date the engine is delivered 

to a first retail purchaser.
B. LENGTH OF COVERAGE
FUJI  warrants  to  a  first  retail  purchaser  and  each  subsequent 

purchaser that the engine is free from defects in materials and 

workmanship  that  cause  the  failure  of  a  warranted  emission-

related part for a period of two (2) years after the date of delivery 

to the first retail purchaser.
C. WHAT IS COVERED:
1. REPAIR OR REPLACEMENT PARTS

Repairs  and  replacement  of  any  warranted  part  will  be 

performed at no charge to you by an authorized service dealer 

or a warranty station. You may contact the Robin America Inc. 

Customer Service Department at 1-630-350-8200 to obtain the 

name of the nearest appropriate location where your warranty 

repairs are performed.

2. WARRANTY PERIOD

This  warranty  continues  for  a  period  of  two  (2)  years  and 

applies  only  to the  repair, replacement  or adjustment  of the 

component  parts  that  are  not  scheduled  for  replacement 

as  required  maintenance.  Further,  component  parts  which 

are  scheduled  only  for  regular  inspection  to  the  effect  of 

“repair or replace as necessary” are warranted for the warranty 

period. Any warranted part which is scheduled for replacement as 

required maintenance is warranted for the period of time up to 

the first scheduled replacement point for that part.

3. DIAGNOSIS

You  will  not  be  charged  for  diagnostic  labor  that  leads  to 

the  determination  that  a  warranted  part  is  defective,  if  the 

diagnostic work is performed at an authorized service dealer 

or warranty station.

4. DAMAGES
  If  a  warranted  part  failed  causing  damage  to  other  engine 

components, consult a warranty station.

CALIFORNIA EMISSION CONTROL WARRANTY STATEMENT

YOUR WARRANTY RIGHTS AND OBLIGATIONS

The California Air Resources Board and Fuji Heavy Industries Ltd. (herein “FUJI”) are pleased to explain the emission control system warranty 

on your 2002 and later Small Off-Road engine (herein “engine”). In California, the engine must be designed, built and equipped to meet the 

State’s stringent anti-smog standards. FUJI must warrant the emission control system on your engine for the periods of time described 

below, provided there has been no abuse, neglect or improper maintenance of your engine. Your emission control system may include parts 

such as the carburetor or fuel-injection system, and the ignition system. Also included may be hoses, belts, connectors and other emission-

related assemblies. Where a warrantable condition exists, FUJI will repair your engine at no cost to you including diagnosis, parts and 

labor.
MANUFACTURER’S WARRANTY COVERAGE:

The 2002 and later engines are warranted for two (2) years. If any emission related part on your engine is defective, the part will be repaired 
or replaced by FUJI.

OWNER’S WARRANTY RESPONSIBILITIES:

- As the engine owner, you are responsible for the performance of the required maintenance listed in your Owner’s Manual. FUJI recommends 

that you retain all receipts covering maintenance on your engine, but FUJI cannot deny warranty solely for the lack of receipts or for your 
failure to ensure the performance of all scheduled maintenance.

- As the engine owner, you should, however, be aware that FUJI may deny you warranty coverage if your engine or a part has failed due to 

abuse, neglect, improper maintenance or unapproved modifications.

- You are responsible for presenting your engine to a service dealer or warranty station authorized by ROBIN AMERICA Inc. 940 Lively 

Blvd.,  Wood  Dale,  IL  60191  (herein  ROBIN  AMERICA)  as  soon  as  a  problem  exists.  The  warranty  repairs  should  be  completed  in 
a reasonable amount of time, not to exceed 30 days.

If you have any questions regarding your warranty rights and responsibilities, you should contact the Robin America Inc. Customer Service 
Department at 1-630-350-8200.

LIMITED WARRANTY

on Emission Control Systems

-California Only-

FUJI warrants to the owner of the 2002 and later engine that the engine (1) has been designed, built and equipped so as to conform at 
the time of manufacture with the applicable regulations of the California Air Resources Board, and (2) is free from defects in materials and 
workmanship that could cause it to fail to conform with those regulations as may be applicable in the terms and conditions stated below.

D. WHAT IS NOT COVERED
1. This limited warranty does not cover any part which malfunctions, 

fails or is damaged due to failure to follow the maintenance and 

operating instructions set forth in the 2002 and later Owner’s 

Manual including:

(1) improper or inadequate maintenance of any warranted parts

(2) improper installation, adjustment or repair of the engine or 

of  any  warranted  part  unless  performed  by  an  authorized 

service dealer

(3) failure to follow recommendations on fuel use contained in 

the 2002 and later Owner’s Manual

(4) repairs performed outside of the authorized warranty service 

dealers

(5) use of parts which are not authorized by FUJI.

2. Add-on or modified parts

This warranty does not cover any part that malfunctions, fails or 

is damaged due to alterations by changing, adding to or remov-

ing parts from the engine.

3. Expenses incurred by processing warranty claims

FUJI, any authorized service dealer and warranty station shall 

not be liable for any loss of use of the engine, for any alternative 

usage, for any damage to goods, loss of time or inconvenience.

E. HOW TO FILE A CLAIM
All repairs qualifying under this Limited Warranty must be performed 

by a dealer who sold you the engine or warranty station authorized 

by ROBIN AMERICA. In the event that any emission-related part is 

found to be defective during the warranty period, you must notify 

the Robin America Inc. Customer Service Department at 1-630-350-

8200 and you will be advised of the appropriate warranty service 

facilities where the warranty repair is to be performed.
F. WHERE TO OBTAIN WARRANTY SERVICE
It  is  recommended  that  warranty  service  be  performed  by  the 

authorized  dealer  who  sold  you  the  engine,  although  warranty 

service  will  be  performed  by  any  authorized  service  dealers  or 

warranty stations anywhere in the United States.

Summary of Contents for RY80030



























Reviews: