![background image](http://html1.mh-extra.com/html/ryobi/ry3818/ry3818_operators-manual_1504243016.webp)
Page 16 — English
WARNING:
THE SAW CHAIN SHOULD NEVER TURN AT
IDLE. Turn the idle speed screw
“T”
counter-
clockwise to reduce the idle RPM and stop the
chain, or contact a qualified service center for
adjustment and discontinue use until the repair
is made. Serious personal injury may result from
the saw chain turning at idle.
PULL AND PUSH
See Figure 13.
The reaction force of the saw is always opposite to
the direction the chain is moving. Thus, the operator
must be ready to control the PULL when cutting
on the bottom edge of the bar and the PUSH when
cutting along the top edge.
NOTE:
The chain saw has been fully factory tested.
It is normal to find some slight lubricant residue
on the saw.
WARNING:
KICKBACK occurs when the moving chain
contacts an object at the upper portion of the
tip of the guide bar or when the wood closes in
and pinches the saw chain in the cut. Contact
at the upper portion of the tip of the guide bar
can cause the chain to dig into the object and
stop the chain for an instant. The result is a
lightning-fast reverse reaction which kicks the
guide bar up and back toward the operator. If
the saw chain is pinched along the top of the
guide bar, the guide bar can be driven rapidly
back toward the operator. Either of these reac-
tions can cause loss of saw control, which can
result in serious injury.
Do not rely exclusively upon the safety devices
built into the saw. As a chain saw user, you
should take steps to keep your cutting jobs
free from accident or injury. See
General Safety
Rules
for more details.
PULL
PUSH
Fig. 13
OPERATION
Summary of Contents for RY3818
Page 40: ...NOTES...
Page 80: ...NOTES...