![background image](http://html1.mh-extra.com/html/ryobi/rlt-310/rlt-310_owners-operating-manual_1507151012.webp)
11
MAINTENANCE
SPOOL REPLACEMENT
Line diameter: ø1.2mm x 6m
Stop the machine, disconnect the plug from the
mains supply. Hold the line head and unscrew the
spool in a anticlockwise direction, Fig.10.
Remove the empty spool from the string head.
Keep the line attached to the spool.
To install the new spool, make sure the two lines
are captured in the slots opposite each other on the
spool and each line is extended approximately
150 mm beyond each slot.
Thread the strings into the spool holes in the line
head. Carefully push the spool into the line head
(gently pull the lines to the outside if necessary).
When the spool is positioned in line string head,
grasp the strings and pull sharply to release them
from the slots in the spool. Screw on the spool in a
clockwise direction making sure it is securely
fastened.
Fig. 10