Ryobi RJS720, Original Instructions Manual

Page: 4 / 124

English
2
■ Keep your body warm in cold weather. When operating
the unit wear gloves to keep the hands and wrists
warm. It is reported that cold weather is a major factor
contributing to Raynaud’s Syndrome.
■ After each period of operation, exercise to increase
blood circulation.
■ Take frequent work breaks. Limit the amount of
exposure per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor about
these symptoms.
WARNING
Injuries may be caused or aggravated by prolonged use
of a tool. When using any tool for prolonged periods,
ensure you take regular breaks.
KNOW YOUR PRODUCT
See page 83.
1. Trigger switch
2. Lock-on button
3. Blade clamp releaser
4. Blade
5. Allen key
6. Power cord sleeve
7. Blower switch
8. Base assembly
9. Dust port
10. Line assist assembly
11. Handle, insulated gripping surface
MAINTENANCE
WARNING
The product should never be connected to a power
supply when assembling parts, making adjustments,
cleaning, performing maintenance, or when the product
is not in use. Disconnecting the product from the power
supply will prevent accidental starting that could cause
serious injury.
WARNING
When servicing, use only original manufacturer’s
replacement parts, accessories and attachments. Use of
any other parts may create a hazard or cause product
damage.
WARNING
Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.
■ Avoid using solvents when cleaning plastic parts. Most
plastics are susceptible to various types of commercial
solvents and may be damaged by their use. Use clean
cloths to remove dirt, carbon dust, etc.
■ Always wear safety goggles or safety glasses with
side shields when operating or cleaning the product. If
operation is dusty, also wear a dust mask.
■ Clean the product using a brush or a dust collection
system.
WARNING
Do not use compressed air to blow dust/dirt from any
power tool. Dirt and grit blown away by compressed air
can cause serious eye injury.
■ If the supply cord is damaged, it must be replaced
by a special cord or assembly available from the
manufacturer or its service agent.
■ For greater safety and reliability, all repairs should be
performed by an authorised service centre.
■ All of the bearings in the product are lubricated with
a sufficient amount of high grade lubricant for the life
span of the product under normal operating conditions.
Therefore, no further lubrication is required.
ENVIRONMENTAL PROTECTION
Recycle raw materials instead of disposing
of as waste. The machine, accessories and
packaging should be sorted for environment-
friendly recycling.
SYMBOLS ON THE PRODUCT
Safety alert
V Volts
Hz Hertz
Alternating current
W Watts
n
o
No-load speed
min־¹ Revolutions or reciprocations per minute