background image

8

EnGLISH (Original Instructions)

FILLInG THE TAnK

 WARnInG:

Petrol is extremely flammable and explosive. A fire or 

explosion from petrol will burn you and others.  Always 

shut  off  engine  before  fuelling.  Never  add  fuel  to  a 

machine with a running or hot engine. Move at least 

10m from refuelling site before starting engine. Do not 

smoke and stay away from open flames and sparks. 

Failure  to  safely  handle  fuel  could  result  in  serious 

personal injury.

 

„

Position the hedge trimmer on its side with the fuel cap 

pointing upward.

 

„

Always  refuel  outdoors  in  a  well  ventilated  area  away 

from sparks, flames and other ignition sources. Choose a 

hard level surface for this task.

 

„

Clean surface around fuel cap to prevent contamination.

 

„

Loosen fuel cap slowly. Rest the cap on a clean surface.

 

„

Carefully pour fuel into the tank. Avoid spillage.

 

„

Clean and inspect the fuel cap gasket before replacing 

the fuel cap.

 

„

Replace  fuel  cap  and  hand  tighten.  Wipe  up  any  fuel 

spillage.

 

„

Move  at  least  10m  away  from  refuelling  area  before 

starting the product.

nOTE: 

It  is  normal  for  smoke  to  be  emitted  from  a  new 

engine during first use.

 WARnInG:

Check for fuel leaks. A leaking fuel cap is a fire hazard 

and must be replaced immediately. If you find any leaks, 

correct the problem before using the product. Failure 

to do so could result in a fire that could cause serious 

personal injury.

STARTInG AnD STOPPInG

See Figures 2 - 4.
The  starting  method  differs  depending  on  whether  the 
engine is cold or warm.

 

WARnInG:

When the engine starts with the choke in the COLD 

START  position,  the  blades  will  move.  Keep  body, 

objects, and obstructions away from blades. Failure to 

keep away from the blades can result in serious injury.

To start a cold engine:

 

„

DO  NOT  squeeze  the  throttle  trigger  until  the  engine 

starts and runs.

 

„

Place the hedge trimmer on level ground and ensure that 

no objects or obstructions are in the immediate vicinity 

Fig. 3

Fig. 4

Fig. 2

on/off 

switch

tRiGGER 

lock

stARt

RUn

thRottlE

tRiGGER

OPERATIOn

Summary of Contents for RHT2660DAG
















Reviews: