
10
EnGLISH (Original Instructions)
WARnInG:
Before inspecting, cleaning, or servicing the machine,
shut off engine, wait for all moving parts to stop, and
disconnect spark plug wire and move it away from spark
plug. Failure to follow these instructions can result in
serious personal injury or property damage.
GEnERAL MAInTEnAnCE
Avoid using solvents when cleaning plastic parts. Most plastics
are susceptible to damage from various types of commercial
solvents and may be damaged by their use. Use clean cloths
to remove dirt, dust, lubricant, grease, etc.
WARnInG:
Do not at any time let brake fluids, petrol, petroleum-based
products, penetrating lubricants, etc., Come in contact
with plastic parts. Chemicals can damage, weaken or
destroy plastic which may result in serious personal
injury.
Only carry out scheduled maintenance as listed in this
manual. All other repairs and maintenance should be
carried out by an Authorised Service Center. For your
nearest service center call RYOBI CUSTOMER SERVICE
1300 361 505 or visit our website www.ryobi.com.au or
www.ryobi.co.nz
WARnInG:
Blades are sharp. When handling the blade assembly,
wear non-slip, heavy-duty protective gloves. Do not
place your hand or fingers between blades or in any
position where they could get pinched or cut. NEVER
touch blades or service the unit with the spark plug
wire connected.
MAInTEnAnCE
OPERATIOn
correct to avoid the string tangling into the blades.
Trim the side of a hedge so that it will be slightly narrower
at the top. More of the hedge will be exposed when
shaped this way, and it will be more uniform.
Always wear gloves when using the hedge trimmer.
When trimming new growth, use a wide sweeping action,
so that the stems are fed directly into the cutting blade.
Older growth will have thicker stems and will be trimmed
easiest by using a sawing movement.
It has been reported that vibrations from hand-held tools
may contribute to a condition called Raynaud’s Syndrome
in certain individuals. Symptoms may include tingling,
numbness and blanching of the fingers, usually apparent
upon exposure to cold. Hereditary factors, exposure to
cold and dampness, diet, smoking and work practices
are all thought to contribute to the development of these
symptoms. There are measures that can be taken by the
operator to possibly reduce the effects of vibration:
a. Keep your body warm in cold weather. When operating
the unit wear gloves to keep the hands and wrists warm. It
is reported that cold weather is a major factor contributing
to Raynaud’s Syndrome.
b. After each period of operation, exercise to increase blood
circulation.
c. Take frequent work breaks. Limit the amount of exposure
per day.
If you experience any of the symptoms of this condition,
immediately discontinue use and see your doctor about
these symptoms.
OPERATInG THE HEDGE TRIMMER
WARnInG:
Read the safety information for safe operation using the
blade. Extreme care must be taken when using blades
to ensure safe operation. Refer to Specific Safety Rules.
Always hold hedge trimmer with both hands when
operating. Use a firm grip on the handles. The unit is
used for cutting in either direction in a slow, sweeping
action from side to side.
The hedge trimmer should be positioned so that your
body will not come into contact with the muffler or the
power head. Stand so that you are stable and balanced
on both feet.
Inspect and clear the area of any hidden objects. Never
cut or trim anywhere you cannot clearly see the entire
length of the blades.
Never use the hedge trimmer near power lines, fencing,
posts, buildings, or other immovable objects.
Never use a blade after hitting a hard object without first
inspecting it for damage. Do not use if any damage is
detected.
WARnInG:
When servicing, use only identical replacement parts.
Use of any other parts may create a hazard or cause
product damage.
WARnInG:
Always wear safety goggles or safety glasses with side
shields during product operation. If operation is dusty,
also wear a dust mask.