background image

5

EnGLISH (Original Instructions)

Lubricant

Use synthetic 2-stroke lubricant for air cooled engines.

Mix Petrol and Lubricant

Mix the fuel mix thoroughly and also each time before 

refuelling.

Switch

On/Off Switch

I  = ON to Run

O = OFF to Stop

Wet Conditions Alert

Do not use in rain or wet conditions.

SYMBOLS

SERVICE

Servicing requires extreme care and knowledge and should 

be  performed  only  by  a  qualified  service  technician.  For 

service we suggest you return the product to the nearest 

AUTHORISED SERVICE CEnTER

 for repair. When servicing, 

use only identical replacement parts.

SAVE THESE InSTRUCTIOnS

The following signal words and meanings are intended to explain the levels of risk associated with this product. 

SYMBOL  SIGnAL 

MEAnInG

DAnGER:

 

 

Indicates an imminently hazardous situation, which, if not avoided, will 

result in death or serious injury.

WARnInG:

 

Indicates a potentially hazardous situation, which, if not avoided, could 

result in death or serious injury.

CAUTIOn:

 

Indicates a potentially hazardous situation, which, if not avoided, may result 

in minor or moderate injury. 

CAUTIOn:

 

(Without  Safety Alert  Symbol)  Indicates  a  situation  that  may  result  in 

property damage.

 

 WARnInG:

 To  avoid  serious  personal  injury,  do  not  attempt 

to  use  this  product  until  you  read  thoroughly  and 

understand completely the operator’s manual. If you 

do not understand the warnings and instructions in the 

operator’s manual, do not use this product. Call Ryobi 

customer service for assistance.

 

 WARnInG:

 The operation of any power tool can result in foreign 

objects being thrown into your eyes, which can result 

in severe eye damage. Before beginning power tool 

operation,  always  wear  safety  goggles  or  safety 

glasses with side shields and, when needed, a full face 

shield. We recommend Wide Vision Safety Mask for 

use over eyeglasses or standard safety glasses with 

side shields. 

Summary of Contents for RHT2660DAG
















Reviews: