background image

OWNER’S OPERATING MANUAL

BELT DRIVEN COMPRESSOR

MODEL RC-3100B

KEEP THIS MANUAL FOR FUTURE REFERENCE

Your new compressor has been engineered and manufactured to Ryobi’s high
standard of dependability, ease of operation and operator safety. Properly cared
for, it will give you years of rugged, trouble free performance. If you use your
compressor properly and only for what it is intended, you will enjoy years of
safe, reliable service.

SPECIFICATIONS

Voltage................................................................................................... 230V~50Hz
R
Intermittent duty............................................................................................S3 75%

ated power........................................................................................ 2.2kW/3.0HP

Receiver capacity............................................................................................... 100l
Type..................................................................................................... Oil lubricated
Free air delivery (FAD)................................................................................ 365l/min

Oil type......................................................................................................... SAE-30
Oil capacity......................................................................................................500ml

CFM................................................................................................................... 12.9

Working pressure................................................................................. 10bar/145psi
No load speed........................................................................................... 1375min

-1

Sound pressure level.......................................................... L

pA

71.5dB(A),k=3dB(A)

Sound power level............................................................. L

WA

91.5 dB(A),k=3dB(A)

Net weight...................................................................................................... 59.2kg

THANK YOU FOR BUYING A RYOBI

BELT DRIVEN COMPRESSOR

CAUTION: Carefully read through this entire owner’s

manual, paying close attention to the general
safety rules and rules for safe operation,
before using.

1

Summary of Contents for RC-3100B





















Reviews: