8
not place second hand on top of tool or near exhaust
at any time. Failure to heed this warning can result in
serious personal injury.
■
Do not drive fasteners on top of other fasteners or
with the tool at an overly steep angle as this may
cause deflection of fasteners which could cause
injury.
LOADING TOOL
■
Do not load the tool with fasteners when any one of
the operating controls is activated.
When loading tool:
■
Never place a hand or any part of body in fastener
discharge area of tool.
■
Never point tool at anyone.
■
Do not pull the trigger or depress the workpiece
contact as accidental actuation may occur, possibly
causing injury.
SAVE THESE INSTRUCTIONS
■ Refer to them frequently and use them to instruct others
who may use this tool. If you loan someone this tool,
loan them these instructions also.
TRANSPORTING LITHIUM BATTERIES
Transport the battery in accordance with local and national
provisions and regulations.
Follow all special requirements on packaging and labelling
when transporting batteries by a third party. Ensure that
no batteries can come in contact with other batteries
or conductive materials while in transport by protecting
exposed connectors with insulating, non-conductive caps
or tape. Do not transport batteries that are cracked or
leaking. Check with the forwarding company for further
advice.
INTENDED USE
You may use this tool for the purposes listed below:
■ Finish and Trim (Interior and exterior)
■ Door and Window Casing
■ Door Jambs
■ Baseboard
■ Crown Molding
■ Cabinetry
■ Cap and Shoe Molding
■ Molding
■ Staircases
■ Door and Window Trim
■ Chair Rail
■ Brickmold
■ Hardwood Flooring
■ Paneling
■ Furniture
NOTE:
Some timbers (such as very dry hardwood) may
require shorter nails to fully drive in.
DESCRIPTION
1. Air pressure dial
2. Belt clip
3. LED work light grip switch
4. Trigger switch
5. Magazine release button
6. Side-loading magazine
7. Scale
8. Low nail indicator windows
9. No-mar pad
10. Workpiece contact
11. Jam release
12. Depth of drive adjustment
13. LED work lights
14. Screw
15. Depress latches
16. Battery pack
17. No-mar pad storage
18. Brad nails
19. Index arrow
20. Decrease pressure
21. Increase pressure
22. Increase depth
23. Decrease depth
24. Trigger
25. Screwdriver
26. Latch
FEATURES
KNOW YOUR BRAD NAILER
See Figure 1.
The safe use of this product requires an understanding of
the information on the product and in this operator’s manual
as well as a knowledge of the project you are attempting.
Before use of this product, familiarise yourself with all
operating features and safety rules. The design of the
nailer has been modified to meet ANZ requirements and
regulations.
Air pressure dial
Adjust internal air pressure to adjust force for more control.
AirStrike™ Technology
Airstrike™ Technology provides cordless convenience,
eliminating the need for a compressor and bulky air hose.
Construction ruler
A construction ruler located along the left side of the
magazine allows the operator to make quick measurements
while working.
Depth of drive adjustment
The tool-free depth of drive adjustment lets the operator
select precise driving depth of the nail.
