background image

GUARANTEE - STATEMENT

This product is guaranteed from defects in material and workmanship, for a period of 24 months, effective and

evidenced from date of original invoice or delivery note.

Defects caused by normal wear and tear, unauthorized / improper maintenance/handling or overload are excluded

from this guarantee as are accessories such as battery packs, bulbs, blades and bits, etc.

In the event of malfunction within the guarantee period, please return the product UNDISMANTLED with proof of

purchase, to your dealer or nearest Ryobi Service Centre.

Your statutory rights in respect of defective products remain unaffected by the warranty

Machine:

TRIMMER

Type: PLT-3043

Y

A

Name of company:

RYOBI TECHNOLOGIES AUSTRALIA PTY. LTD

Address:

Name of company:

RYOBI TECHNOLOGIES NEW ZEALAND PTY. LTD

Address:

Name of company:

Ryobi Technologies (UK) Limited.

Address:

ANVIL HOUSE, TUNS LANE,

HENLEY-ON-THAMES,

OXFORDSHIRE, RG9 1SA

UNITED KINGDOM

Tel:  +44-1491-848700   Fax:  +44-1491-848701

Name / title: 

Managing Director

Signature:

Name / title: Mark Pearson

Managing Director

Signature:

EC DECLARATION OF CONFORMITY

We declare in sole responsibility that the product: - to which this certificate applies,conforms to the basic health and

safety requirements of the Machinery Directive 98/37/EC and other relevant directives, like EMC Directive 89/336/EEC and

Outdoor Directive 2000/14/EC,79/113/EEC.

To effect correct application of the health and safety requirements stated in the EEC directives,the following European and/or

national standards and/or technical specifications were consulted: EN ISO 14982:1998, ISO 7916 & 7917, EN ISO 11806:1997, 

ISO 7918-1995, ISO 8380-1993, ISO 8893-1989, ISO 10884-1995. EN 292-1.1991, EN 292-2-1991, EN 292-2:1991/A1;1995, 

EN 563-1994, EN 27917-1991, ISO 7112-1982, ISO 7113-1991. 

We declare this product complies to the requirements of the Outdoor Directive 2000/14/EC.

Measured Sound Power Level :               112 dB(A)

Guaranteed Sound Power Level :            113 dB(A)

Date of issuance :                                    April 2005

This product has been assessed to conform to the Outdoor Directive 2000/14/EC by means of unit verification by SLG

PRUEF-UND ZERTIFIZIERUNGS GMBH. BURGSTAEDTER STRASSE 20, D-09232, HARTMANNSDORF,GERMANY.

Technical documents are kept by Homelite Far East Co.,Ltd. 24/F, 388 Castle Peak Road, Tsuen Wan, N.T., Hong Kong.

Declared in April 2005 by Homelite Far East Co.,Ltd.

A.B.N. 98 002 277 509

SYDNEY: 359-361 Horsley Road,

Milperra, N.S.W. 2214.

Tel: (02) 9792 9800   Fax: 1800 807 993

27 Clemow Drive, Mt Wellington

PO Box 12-806, Penrose, Auckland

New Zealand

Tel: (09) 573 0230  Free Call: 0800 279 624 Fax: (09)573 0231

Summary of Contents for PLT-3043YA
















Reviews: