background image

1 — English

App images may vary.

ES1000 LASER DISTANCE MEASURER

IMPORTANT SAFETY INSTRUCTIONS

WARNING!

READ AND UNDERSTAND ALL INSTRUCTIONS.

 Failure 

to follow all instructions listed below, may result in electric 
shock, fire and/or serious personal injury.

WARNING:

Changes or modifications to this unit not expressly 
approved by the party responsible for compliance could 
void the user’s authority to operate the equipment.

WARNING:

Use of controls, adjustments, or performance of 
procedures other than those specified here can results 
in hazardous radiation exposure.

 

Read operator’s manual carefully. Learn the applica-
tions and limitations, as well as the specific potential 
hazards, related to this device. 

Following this rule will 

reduce the risk of electric shock, fire, or serious injury.

 

Do not operate battery devices in explosive atmo-
spheres, such as in the presence of flammable liquids, 
gases or dust.

 Battery devices create sparks which may 

ignite the dust or fumes.

 

Do not disassemble the device. 

Contact with internal 

parts may increase the risk of electric shock or cause 
damage to the device. 

 

Do not use on a ladder or unstable support. 

Stable 

footing on a solid surface enables better control of the 
device in unexpected situations.

 

Do not store the device in an area of high heat or 
humidity. Do not expose the device to extended high 
heat from the sun (such as on a vehicle dashboard.) 

Thank you for purchasing RYOBI

 Phone Works

If you need assistance 

DO NOT RETURN TO THE STORE

 

Please contact us at 1-877-578-6736

TM

TM

To reduce the risk of serious personal injury, do not 
store outside or in vehicles. 

Damage to the device or 

the battery can result.

 

Do not expose device to rain or wet conditions. 

Water 

entering a device will increase the risk of electric shock.

 

Use the device in accordance with these instructions 
and in the manner intended for the device, taking into 
account the environmental conditions and the work to 
be performed. 

Use of the device for operations different 

from those intended could result in a hazardous situation.

This app is optimized for: 

iOS versions 6.0 and higher 

 Android versions 4.0 and higher  

For a full list of compatible phones please visit 

 www.ryobitools.com/phoneworks

Aperture

991000987 

10-27-14 (REV:02)

Summary of Contents for Phone Works ES1000
















Reviews: