6 — English
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter-
pretation of these symbols will allow you to operate the product better and safer.
SYMBOL
NAME
DESIGNATION/EXPLANATION
Recycle Symbol
This product uses lithium-ion batteries. Local, state or federal laws may
prohibit disposal of batteries in ordinary trash. Consult your local waste
authority for information regarding available recycling and/or disposal
options.
Direct Current
Type or a characteristic of current
no
No Load Speed
Rotational speed, at no load
.../min
Per Minute
Revolutions, strokes, surface speed, orbits etc., per minute
V
Volts
Voltage
Hz
Hertz
Frequency (cycles per second)
min
Minutes
Time
PRODUCT SPECIFICATIONS
Motor ......................................................................................................................................................................18 Volt DC
Cutting Capacity..............................................................................................................................................................
1
in.
FEATURES
KNOW YOUR PRUNING SHEAR
See Figure 1.
The safe use of this product requires an understanding of the
information on the product and in this operator’s manual as
well as a knowledge of the project you are attempting. Before
use of this product, familiarize yourself with all operating
features and safety rules.
BLADE
The pruning shear comes with a 2 in. cutting blade that can
be used to cut small limbs and branches.
LED LIGHT
The LED light will illuminate when the switch trigger is pressed.
The light will turn off automatically approximately 30 seconds
after the switch trigger is released or the battery is removed.
LOCK-OUT TRIGGER
The lock-out trigger prevents accidental starting.
SHEATH
The sheath keeps the operator from coming in contact with
the sharp blades when the tool is not in use. It also helps
keep the blades from being nicked or damaged when the
tool is in storage.
SWITCH TRIGGER
The switch trigger activates the motor and blades when it is
depressed and the lock-out button is engaged.
TOOLLESS BLADE REMOVAL
Remove the blade quickly and without tools when sharpen-
ing or replacing the blade.
SYMBOLS
