Ryobi P2503, Operator'S Manual

Page: 9 / 30

7 – English
OPERATION
WARNING:
Do not allow familiarity with products to make you care-
less. Remember that a careless fraction of a second is
sufficient to inflict severe injury.
WARNING:
Always remove battery pack from your tool when you are
assembling parts, making adjustments, cleaning, or when
not in use. Removing battery pack will prevent accidental
starting that could cause serious personal injury.
WARNING:
Always wear eye protection with side shields marked
to comply with ANSI Z87.1, along with head protection.
Failure to do so could result in objects being thrown into
your eyes resulting in possible serious injury.
WARNING:
Do not use any attachments or accessories not recom-
mended by the manufacturer of this product. The use of
attachments or accessories not recommended can result
in serious personal injury.
APPLICATIONS
The product is intended for the cutting and pruning of small
limbs and branches on trees and shrubs.
WARNING:
Battery tools are always in operating condition. Lock the
switch when not in use or carrying at your side, when
installing or removing the battery pack, and when install-
ing or removing the blade.
ASSEMBLY

Inspect the product carefully to make sure no breakage
or damage occurred during shipping.

Do not discard the packing material until you have carefully
inspected and satisfactorily operated the product.

If any parts are damaged or missing, please call
1-800-525-2579 for assistance.
PACKING LIST
Recipricating Pruning Saw
Operator’s Manual
WARNING:
If any parts are damaged or missing do not operate this
product until the parts are replaced. Use of this product
with damaged or missing parts could result in serious
personal injury.
WARNING:
Do not attempt to modify this product or create
accessories not recommended for use with this product.
Any such alteration or modification is misuse and could
result in a hazardous condition leading to possible serious
personal injury.
WARNING:
To prevent accidental starting that could cause serious
personal injury, always remove the battery pack from the
product when assembling parts.
INSTALLING THE BLADE
See Figure 2.
 Remove the battery pack

Push and rotate the blade release lock counterclockwise.
 Insert the blade, and allow it to lock in position.

Release the blade release lock.
NOTE:
To check if the blade is inserted correctly pull the
blade away from the saw. If inserted correctly, the blade
will sit firmly in the blade release lock.