background image

7

MAINTENANCE

WARNING:

When  servicing,  use  only  identical  replacement  parts. 
Use  of  any  other  parts  may  create  a  hazard  or  cause 
product damage.

WARNING:

Always wear safety goggles or safety glasses with side 
shields  during  power  tool  operation  or  when  blowing 
dust. If operation is dusty, also wear a dust mask.

WARNING:

To  avoid  serious  personal  injury,  always  remove  the 
battery pack from the tool when cleaning or performing 
any maintenance.

GENERAL MAINTENANCE

Avoid  using  solvents  when  cleaning  plastic  parts.  Most 
plastics are susceptible to damage from various types of 
commercial solvents and may be damaged by their use. Use 
clean cloths to remove dirt, dust, oil, grease, etc.

WARNING:

Do not at any time let brake fluids, gasoline, petroleum-
based products, penetrating oils, etc., come in contact 
with  plastic  parts.  Chemicals  can  damage,  weaken  or 
destroy  plastic  which  may  result  in  serious  personal 
injury.

BATTERIES

The  battery  pack  for  this  tool  is  equipped  with  nickel-
cadmium rechargeable  batteries.  Length  of  service  from 
each charging will depend on the type of work you are doing.

The  batteries  in  this  tool  have  been  designed  to  provide 
maximum trouble-free life. However, like all batteries, they 
will eventually wear out. 

Do not disassemble battery pack 

and  attempt  to  replace  the  batteries.  Handling  of  these 
batteries, especially when wearing rings and jewelry, could 
result in a serious burn.
To obtain the longest possible battery life, we suggest the 
following:

  Remove the battery pack from the charger once it is fully 

charged and ready for use.

For battery storage longer than 30 days:

  Store the battery pack where the temperature is below 

80°F. 

  Store battery packs in a “discharged” condition.

BATTERY PACK REMOVAL AND 
PREPARATION FOR RECYCLING

To preserve natural resources, please re-
cycle or dispose of batteries properly.
This product contains nickel-cadmium 
batteries.  Local,  state  or  federal  laws 
may prohibit disposal of nickel-cadmium 
batteries in ordinary trash.

Consult your local waste authority for information regarding 
available recycling and/or disposal options. 

WARNING: 

Upon  removal,  cover  the  battery  pack’s  termi-
nals  with  heavy-duty  adhesive  tape.  Do  not  at-
tempt  to  destroy  or  disassemble  battery  pack  or 
remove  any  of  its  components.  Nickel-cadmium 
batteries must be recycled or disposed of properly. Also, 
never  touch  both  terminals  with  metal  objects  and/or 
body parts as short circuit may result. Keep away from 
children.  Failure  to  comply  with  these  warnings  could 
result in fire and/or serious injury.

Summary of Contents for P120









Reviews: