background image

BATTERY PROTECTION FEATURES

Lithium-ion battery packs are designed with features that 
protect the lithium-ion cells and maximize battery life.
If the tool stops during use, release the trigger to reset and 
resume operation. If the tool still does not work, the battery 
needs to be recharged.

COLD WEATHER OPERATION

The lithium-ion battery pack can be used in temperatures 
down to 32°F (0°C). Put the battery pack on a tool and use 
the tool in a light duty application. After about a minute, the 
pack will warm up and begin operating normally.

CHARGING THE BATTERY PACK

Battery packs are shipped in a low charge condition to 
prevent possible problems. Therefore, you should charge 
prior to first use. If the charger does not charge the battery 
pack under normal circumstances, return both the battery 
pack and charger to your nearest Authorized Service Center 
for electrical check.

  Charge the battery pack only with the recommended 

charger.

  Connect the charger to a power supply. For approved power 

sources, refer to the operator’s manual for the charger.

  Make sure the battery pack is secured in the charger 

before beginning operation.

  Press down on the battery pack to be sure contacts on 

the battery pack engage properly with contacts in the 
charger.

  The battery pack may become slightly warm to the touch 

while charging. This is normal and does not indicate a 
problem.

  Do not place the charger and battery pack in an area of 

extreme heat or cold. They will work best at normal room 
temperature. 

CHARGING A HOT BATTERY PACK

When using a tool continuously, the battery pack may 
become hot. A hot battery pack may be placed directly onto 
the charger port but charging will not begin until the battery 
temperature cools to within acceptable temperature range. 
When a hot battery pack is placed on the charger, the charger 
may indicate the pack is not ready to charge. Please refer 
to charger operator’s manual. When the battery pack cools, 
the charger will automatically begin charging.

CHARGING A COLD BATTERY PACK

A cold battery pack may be placed directly onto the charger 
port but charging will not begin until the battery temperature 
warms to within acceptable temperature range. When a 
cold battery pack is placed on the charger, the charger may 
indicate the pack is not ready to charge. Please refer to 
charger operator’s manual. When the battery pack warms, 
the charger will automatically begin charging.

SAVE THESE INSTRUCTIONS

990000184
7-12-12 (REV:01)

ONE WORLD TECHNOLOGIES, INC.

1428 Pearman Dairy Road

Anderson, SC 29625

A subsidiary of Techtronic Industries Co., Ltd.

OTC: TTNDY

Phone 1-800-525-2579

www.ryobitools.com

RYOBI is a registered trademark of Ryobi Limited and is used pursuant to 
a license granted by Ryobi Limited.

MAINTENANCE

BATTERIES

These batteries have been designed to provide maximum 
trouble-free life. However, like all batteries, they will 
eventually wear out. Do not disassemble battery pack and 
attempt to replace the batteries. Handling of these batteries, 
especially when wearing rings and jewelry, could result in 
a serious burn.
For battery pack storage longer than 30 days:

  Store the battery pack where the temperature is below 

80°F and away from moisture.

  Store battery packs in a 30%-50% charged condition.

  Every six months of storage, charge the pack as normal.

BATTERY PACK REMOVAL AND PREPARATION 
FOR RECYCLING

To preserve natural resources, please recycle or dispose of 
batteries properly.

This product contains lithium-ion batteries. 
Local, state or federal laws may prohibit 
disposal of lithium-ion batteries in ordinary 
trash.
Consult your local waste authority for 
information regarding available recycling and/
or disposal options. 

WARNING: 

Upon removal, cover the battery pack’s terminals with 
heavy-duty adhesive tape. Do not attempt to destroy 
or disassemble battery pack or remove any of its 
components. Batteries must be recycled or disposed 
of properly. Also, never touch both terminals with metal 
objects and/or body parts as short circuit may result. 
Keep away from children. Failure to comply with these 
warnings could result in fire and/or serious injury.

Summary of Contents for P102







Reviews: