background image

5

Original Instructions

 

Store the product in a cool, dry, and well-ventilated area 

that is inaccessible to children. Keep the product away 

from corrosive agents such as garden chemicals and de-

icing salts. Do not store the product outdoors.

TRANSPORTING LITHIUM BATTERIES

Transport the battery in accordance with local and national 

provisions and regulations.
Follow all special requirements on packaging and labelling 

when transporting batteries by a third party. Ensure that 

no batteries can come in contact with other batteries 

or conductive materials while in transport by protecting 

exposed connectors with insulating, non-conductive caps or 

tape. Do not transport batteries that are cracked or leaking. 

Check with the forwarding company for further advice.

SAFETY DEVICES

ON/OFF SWITCH

The on/off switch is easily accessible while using the product 

to turn the product on or off.

PRESSURE PROTECT SWITCH

The pressure protect switch turns on when the maximum 

pressure is reached.

SYMBOLS ON THE PRODUCT

Safety alert

Read and understand all instructions 

before operating the product. Follow all 

warnings and safety instructions.
Waste electrical products should not 

be disposed of with household waste. 

Please recycle where facilities exist. 

Check with your local authority or 

retailer for recycling advice.

Wear eye protection.

Wear appropriate respiratory mask.

Do not expose to rain or damp 

condition.

Wear non-slip, heavy-duty protective 

gloves.

Wear non-slip safety footwear when 

using the product.

Wear protective clothing.

Keep bystanders, especially children 

and animals away from the work 

area. Never spray in the direction of 

bystanders.

SYMBOLS IN THIS MANUAL

Note

Warning

Summary of Contents for OBS1815





















Reviews: