background image

4

Original Instructions

change clothing that are contaminated with plant control 

chemicals.

 WARNING!

 Keep spray materials away from eyes. 

If spray materials come in contact with the eyes, wash 

them immediately with clean water. If irritation persists, 

immediately seek medical help.

ADDITIONAL SAFETY WARNINGS

 

Never allow children, persons with reduced physical, 

sensory or mental capabilities or lack of experience 

and knowledge, or people who are unfamiliar with these 

instructions to use the product.

 

Keep the area clear of all bystanders, children, and pets 

while spraying.

 

Be aware of any hazards presented by the spray 

materials. Before using any pesticide or other spray 

materials with the product, carefully read the label on the 

original container, and follow the instructions.

 

Ensure that the spray wand is securely connected 

to the spray wand handle before using the product. If 

necessary, use pliers to attach the spray wand to the 

spray wand handle.

 

Properly replace and tighten the spray tank cover after 

pouring liquid into the spray tank.

 

Use only consumer-grade water-based lawn and garden 

chemicals.

 

Do not use commercial-grade chemicals or chemicals 

for commercial or industrial purposes.

 

Do not use caustic (alkali) self-heating or corrosive 

(acid) liquids with the product. These can corrode metal 

parts or weaken the tank and hose.

 

Do not leave residue or spray material in the spray tank 

after using the product. Clean the product after each 

use.

 

Do not pour hot or boiling liquids into the spray tank. 

These can weaken or damage the hose or spray tank.

 

Do not overfill the tank.

 

The spray area must be well-ventilated.

 

Do not smoke, eat, or drink while using the product.

 

Do not discharge spray materials directly against skin.

 

Do not let the spray materials come in contact with skin. 

If contact does occur, wash immediately with soap and 

plenty of water.

 

Aim the nozzle directly at the plants or objects you intend 

to spray.

 

Ensure that the spray materials are directed at an area 

that will not be damaged by the spray materials.

 

Electric shock hazard. Do not spray towards electrical 

outlets.

 

After every use, thoroughly wash your hands and 

any area where skin has been exposed to the spray 

materials.

 

Remove the battery from the product before draining, 

cleaning, or storing to avoid accidental starting.

ADDITIONAL BATTERY SAFETY WARNINGS

 

To reduce the risk of fire, personal injury, and product 

damage due to a short circuit, never immerse your tool, 

battery pack or charger in fluid or allow fluid to flow inside 

them. Corrosive or conductive fluids, such as seawater, 

certain industrial chemicals, and bleach or bleach-

containing products, etc., can cause a short circuit.

 

Charge the battery pack in a location where the ambient 

temperature is between 10°C and 38°C.

 

Store the battery pack in a location where the ambient 

temperature is between 0°C and 40°C.

MAINTENANCE

 

Use only original manufacturer’s replacement parts, 

accessories, and attachments. Failure to do so can cause 

possible injury, can contribute to poor performance, and 

may void your warranty.

 

Servicing requires extreme care and knowledge 

and should be performed only by a qualified service 

technician. Have the product serviced by an authorised 

service centre only.

 

To avoid serious personal injury, always remove 

the battery pack from the product when cleaning or 

performing any maintenance.

 

After each use, check all parts of the product for leaks. 

Return the product to an authorised service centre for 

repair if necessary.

 

You may make adjustments or repairs that are described 

in this manual. For other repairs, contact an authorised 

service centre.

CLEANING THE REFILLABLE CONTAINER

 

Drain all chemical solutions from the refillable container 

into a container approved for chemicals. Do not store the 

chemicals in the refillable container. 

 

Use clean water to clean and rinse the refillable 

container. A small amount of mild household detergent 

may be added. It may be necessary to rinse the refillable 

container more than once.

CLEANING THE PRODUCT

 

Fill the tank about one-third full with clean water. A small 

amount of mild household detergent may be added.

 

Do not use flammable solvents or abrasive cleaning 

agents to clean the product.

 

Spray into a suitable container until the tank has been 

emptied.

 

Refill and repeat the procedure with clean water. It may 

be necessary to rinse the tank more than once, then 

drain again as directed above.

 

Allow all parts to completely dry, then reinstall the tank 

cap.

 

Wipe the outside of the product with a clean, dry cloth.

DISPOSAL

 

Never dispose of residual chemicals or contaminated 

rinsing solutions in waterways, drains, sewers, street 

gutters, or manholes.

 

Dispose of residual chemicals, contaminated rinse 

water, and used containers in accordance with local 

waste disposal regulations.

TRANSPORTATION AND STORAGE

 

Ensure that all parts are clean and dry. Follow the 

procedure described in this manual.

 

Stop the product and remove the battery pack before 

storing or transporting.

 

For transportation, secure the product against movement 

or falling to prevent injury to persons or damage to the 

product.

Summary of Contents for OBS1815





















Reviews: