![background image](http://html1.mh-extra.com/html/r-m-suttner/st-73-1/st-73-1_user-manual_3075919001.webp)
www.rm-suttner.com
1, Ver. 11.2017
User Manual ST-73.1 Foam Lance
Artikel-Nr.: 200 073 ...
General safety notes
Info
Intended use
Description
The ST-73.1 is for foaming suitable foaming agents. The ST-73.1 foam lance is
fi tted with an interchangeable injector nozzle and a foaming pad. By turning an
adjustable grip handle the concentration of foaming agent in the water can be
adjusted.
Available are an optional 1-litre intake container (Product Code 02 0073 513)
or 2-litre intake container (Product Code 02 0073 520).
▪ To guarantee safe operation the injector unit may only be
used in accordance with these Operating Instructions.
▪ Keep these Operating Instructions in a safe place for later
reference.
▪ Please also observe the safety instructions for the detergent
and if applicable of the high pressure cleaner manufacturer.
▪ Do not mix detergents one with the other.
▪ Wear suitable protective clothing and gloves when working.
▪ Never direct the high-pressure jet at persons or other living creatures.
▪ Read the safety data sheets and observe the corresponding safety and handling regulations.
▪ The ST-73.1 foam lance is used for admixing foaming agent to water, subsequent foaming and then foam
application.
▪ Only Pressure Equipment Directive (PED) Group 2 liquids may be used as media. In case of doubt contact the
equipment manufacturer.
▪
The housing of the ST-73.1 was made of PP-GF40, the ST-73.1 is not suitable for forming with strong
acids (pH-value <4), for example formic acid, hydrofl uoric acid etc.
▪ The unit may only be used with a suitable pressure generator.
▪ The unit is not designed for use with persons (children included) with restricted sensory and mental capabilities due
to lack of experience and/or lack of knowledge unless they are supervised by a person responsible for their safety
or if they have received instruction from that person in use of the equipment.
▪ In general children are forbidden to use this equipment.
Flush the foam lance internally and externally with clear water after use. Otherwise there is the risk that that
substances adhering accumulate and adversely affect proper functioning of the foam lance.
Flush the foam lance internally and externally with clear water after use. Otherwise there is the risk that that substances
adhering accumulate and adversely affect proper functioning of the foam lance, otherwise there is the risk that that
substances adhering accumulate and adversely affect proper functioning of the foam lance.
Operation
By turning the adjustable grip on the handle the quantity of foaming agent concen-
trate can be adjusted. In total the ST-73.1 has fi ve detent stages for fi xed positioning
the dosage setting and these are gently noticeable on turning the adjustable grip.
In Position I = lowest concentration
In Position IIIII = highest concentration
Snap-in stage
Adjustment
gpopen
close
Mark
Detail