1
English
GB
FR
DE
ES
IT
NL
PT
DK
SE
FI
NO
RU
PL
CZ
HU
RO
LV
LT
EE
HR
SI
SK
GR
TR
DRILL SAFETY WARNINGS
■
Hold power tool by insulated gripping surfaces
when performing an operation where the cutting
tool may contact hidden wiring or its own cord.
Contact with a “live” wire will make exposed metal
parts of the tool “live” and shock the operator.
■
■
Do not charge battery tool in a damp or wet
location.
Following this rule will reduce the risk of
electric shock.
■
For best results, your battery tool should be
charged in a location where the temperature is
more than 10°C but less than 37.78°C
. To reduce
the risk of serious personal injury, do not store outside
or in vehicles.
■
Always wear safety glasses with side shields.
Everyday glasses have only impact resistant lenses.
They are NOT safety glasses. Following this rule will
reduce the risk of eye injury.
■
Protect your lungs. Wear a face or dust mask if the
operation is dusty.
Following this rule will reduce the
risk of serious personal injury.
■
Protect your hearing. Wear hearing protection
during extended periods of operation.
Following
this rule will reduce the risk of serious personal injury.
■
Battery tools do not have to be plugged into an
electrical outlet; therefore, they are always in
operating condition. Be aware of possible hazards
when not using your battery tool or when changing
accessories.
Following this rule will reduce the risk of
electric shock, fire, or serious personal injury.
■
Do not place battery tools or their batteries near
fire or heat.
This will reduce the risk of explosion and
possibly injury.
■
Do not crush, drop or damage battery pack. Do
not use a battery pack or charger that has been
dropped or received a sharp blow.
A damaged
battery is subject to explosion. Properly dispose of a
dropped or damaged battery immediately.
DESCRIPTION
1. Keyless
Chuck
2. Switch
Trigger
3. Rotation Selector (Forward/reverse)
4.
Battery Pack (not included)
5.
Latches
6.
Depress Latches To Release Battery Pack
7.
Torque Adjusting Ring
8.
To Decrease Torque
9.
To Increase Torque
10.
Reverse
11.
Forward
12.
Unlock (Release)
13.
Lock (Tighten)
14.
Chuck Jaws
15.
High Speed
16.
Low Speed
17.
Two-Speed Gear Switch
18.
Bit Storage
19.
Double-Ended Bit
20.
Drill Bit
SPECIFICATIONS
Voltage 14.4 V
Chuck
0.8
-1
0
mm
Switch Variable speed
No load speed (drill mode):
- Lo speed
0 - 4
0
0 min-
1
- Hi speed
0 - 1
4
00 min-
1
Clutch 24 Positions
Max. Torque
2
5 Nm
Max. Spade Bit
20
mm
Weight - not incl.battery pack
1.
08
Kg
Use auxiliary handle(s), if supplied with the tool.
Loss of control can cause personal injury.
